Tree Cutting Service in Cleburne, Texas
Cutting down trees, cutting back limbs, and cutting up what has already fallen. Serving Cleburne and the rest of Johnson County since 2014 — free written estimates, fully insured crews, and complete clean-up.
Do you provide tree cutting in Cleburne, TX?
Tree Service Pros provides tree cutting in Cleburne, Texas. Cutting down trees, cutting back limbs, and cutting up what has already fallen. Most Cleburne jobs fall between $300 and $2,200. Estimates are free and in writing, the crew is insured, and Cleburne is inside our regular Johnson County service area — call (817) 508-9940.
“Tree cutting” covers three different jobs, and the price gap between them is large. Sorting out which one you actually need is the first thing we do on site. With about 31,352 residents, Cleburne has the mix we see most: established neighbourhoods with mature canopy, newer subdivisions with young trees that were never structurally pruned, and not much room between them.
Root plates here are wide and shallow because there is nowhere to go down — limestone is often less than two feet under the grass. It is why cutting a mature live oak in Cleburne is a rigging job rather than a felling job on most residential lots.
- Service
- Tree Cutting
- Area
- CleburneJohnson County
- Typical range
- $300–$2,200per job, varies by site
- Estimates
- Freewritten, no obligation
What is included in Cleburne
- Felling where there is room to drop it whole
- Sectional cutting where there is not
- Cutting back limbs off roofs and fences
- Bucking and cutting up storm-fallen trees
- Firewood cut and stacked on request
At a glance
Tree Cutting in Cleburne — the short version
| Service area | Cleburne, Johnson County, Texas |
|---|---|
| Population | 31,352 |
| Soil | shallow alkaline clay over limestone (pH 7.8–8.3) |
| Common trees | live oak, cedar elm, Texas ash, Shumard oak |
| Most common problem | Iron chlorosis |
| ZIP codes | 76031, 76033 |
| Typical cost | $300–$2,200 |
| Oak pruning window | July – January |
Signs you need tree cutting in Cleburne
- A tree you want gone but are unsure how it comes down
- Limbs to cut back off a structure
- A storm-fallen tree that needs bucking up
- Firewood you want cut and stacked
- Anything you were considering doing yourself with a chainsaw
Any of these is worth a free look. We will tell you honestly if it can wait.
Three jobs that all get called “tree cutting”
When somebody calls asking about tree cutting, they mean one of three things and the price range between them is roughly ten to one. Cutting a tree down is a removal. Cutting branches back is trimming — off a roof, away from a fence, up over a drive. Cutting up a tree that is already down is storm clean-up, and it is priced by volume and access rather than by height.
It is worth being specific when you call, because it changes what we bring. Cutting a sixty-foot dead red oak away from a house needs a rigging crew; bucking a fallen hackberry into rounds needs a saw and a truck.
The two-thirds rule for hiring
Do not pay in full up front. A deposit on a large job is normal; the balance is due on completion after you have walked it. Any crew asking for the whole amount in cash before starting is telling you something. Also get the scope in writing — 'trim the trees' is not a scope, and it is where nearly every dispute in this trade comes from.
How the job runs
Tree Cutting in Cleburne, step by step
Tell us which of the three it is
Down, back, or up — it decides the crew and the equipment.
Site visit and written quote
Free, and it includes exactly what is being cut and what happens to the wood.
Utilities and access checked
Service drops, sprinkler lines, gate widths.
Cut in a planned sequence
Tension released deliberately; anything over a target roped rather than dropped.
Wood handled as agreed
Hauled, chipped, or cut to firewood length and stacked — your choice, priced up front.
Pricing
What tree cutting costs in Cleburne
Most tree cutting work in Cleburne falls between $300 and $2,200 for a typical residential job. That is a real range, not a teaser — what puts a job at one end or the other is below.
What moves the price
- Which of the three jobs it actually is
- Height, diameter and total wood volume
- Whether there is a clear drop zone
- What happens to the wood — haul-off is a real share of the cost
- Access and how far material has to be carried to the truck
The only way to get a real number is for someone to look at it. That visit is free — request an estimate or call (817) 508-9940. Full pricing detail for every service is in our North Texas tree service cost guide.
Local conditions
Cleburne soil, species and timing
The ground under Cleburne is shallow alkaline clay over limestone, typical of the Fort Worth Prairie. Soil pH runs around 7.8–8.3, which is why iron chlorosis shows up here so consistently — high soil pH locks up iron and manganese, so red oaks and maples yellow between the veins while the veins stay green.
We cover ZIP codes 76031 and 76033. Because we are already working nearby, scheduling in Cleburne is usually easy — Keene (4 mi), Coyote Flats (7 mi), Joshua (7 mi) and Rio Vista (8 mi) are all on the same route.
Timing oak work in Cleburne
Oak wilt is present across North Central Texas, and the single most important rule is timing: the Texas A&M Forest Service advises against pruning oaks between February 1 and June 30, when sap-feeding beetles are active and fresh cuts are how the fungus gets in. If an oak has to be cut in that window — storm damage does not wait — every wound gets painted immediately. We schedule non-urgent oak work in July through January.
People in Cleburne search for this as limb cutting, cut down a tree, or simply tree felling in Cleburne — it is all the same job, and the estimate is free either way.
Timing
Tree care calendar for Cleburne
| When | What matters |
|---|---|
| Jan–Feb | Best window of the year for structural pruning. Trees are dormant, the framework is visible with the leaves off, and crews are less booked. |
| Feb 1–Jun 30 | Do not prune oaks. Paint any unavoidable wound immediately — storm damage included. |
| Mar–May | Storm season. Straight-line winds find weak unions first. Deadwood and over-extended limbs are worth clearing before it starts. |
| Jun–Aug | Heat and drought stress. Water deeply and infrequently; the thin soil over limestone here dries from the bottom up. Watch for iron chlorosis. |
| Sep–Oct | Root growth restarts as soil cools — the best planting window and a good time for soil correction. |
| Nov–Dec | Leaves down, structure visible. Removals are cheapest now: lighter canopy, firmer ground, less rigging. |
Straight answers
Tree Cutting in Cleburne — straight answers
What does tree cutting cost in Cleburne?
Most Cleburne jobs run $300–$2,200. Access moves this more than tree size does.
Do you cover Cleburne?
Yes — Cleburne is in Johnson County, inside our regular route, 28 miles from our Fort Worth base. Estimates are free and usually within a couple of business days.
When is the right time of year?
Late summer through winter for most work. On oaks it is not optional — nothing between February 1 and June 30, because of oak wilt.
Are you licensed and insured?
General liability and workers' compensation, certificate sent before you book. Texas does not license tree services, which is why that question matters more here than elsewhere.
FAQ
Tree Cutting in Cleburne — questions we get asked
How much does it cost to cut down a tree in Cleburne?
Small trees under about 25 feet usually run $300–$650. Mid-size trees of 25–50 feet are commonly $650–$1,500. Large trees over 50 feet, or anything requiring rigging over a house, generally start around $1,500 and go up with size and difficulty. Stump grinding and haul-off are separate line items.
Will you leave the wood for firewood?
Happily — say so when we quote. Leaving rounds on site reduces the price because we are not hauling the volume. We can cut to a length you specify and stack it, which adds a little labour but is usually still cheaper than haul-off.
How soon can you get to my property in Cleburne?
Estimates in Cleburne are usually within a couple of business days. Scheduled work typically runs one to two weeks out depending on season — spring and post-storm periods are busiest. Hazard situations get moved to the front of the queue.
Do you charge extra for difficult access?
It is priced into the quote rather than added afterwards. Access is the single biggest cost driver in this trade, which is why we look at every job in person instead of quoting from a description.
Do you serve areas outside Cleburne?
Yes — our regular territory covers Tarrant, Johnson, Parker, Hill and Bosque Counties and the cities inside them. Cleburne is on our normal route.
What payment methods do you take?
All standard forms — card, check, cash and bank transfer. On larger jobs a deposit is normal with the balance due on completion, after you have seen the finished work. We do not ask for payment in full before starting.
What if I only want an opinion, not work done?
That is fine and it is free. A fair share of what we look at does not need what it was quoted for. We would rather tell you that and be the people you call next time.
Do I need to be home while you work?
No, as long as we have access and have already walked the job with you. Plenty of Cleburne customers are at work while we are there. We will call before we start and send photos when we finish.
Other tree services we provide in Cleburne
Root Barriers in Cleburne
Redirecting roots away from foundations, drives and pools — without killing the tree.
Learn more →Shrub & Hedge Trimming in Cleburne
Shaping, thinning and renewing the shrubs and hedges around the house.
Learn more →Tree Surgeon in Cleburne
The climbing, cutting and rigging work — done by people with the credentials to back the name.
Learn more →Tree Disease Treatment in Cleburne
Diagnosis and treatment for the diseases that actually kill North Texas trees.
Learn more →Commercial Tree Service in Cleburne
Property-wide tree work for HOAs, commercial sites, churches and municipalities.
Learn more →Brush Removal in Cleburne
Hauling off brush piles, storm debris and yard-waste stacks.
Learn more →Tree Cutting near Cleburne
We cover the whole corridor, so a job in Cleburne is rarely a special trip.
See all cities in Johnson County, or our full service area map. Looking for tree cutting across the whole region? See Tree Cutting Service.
Standards and sources we work to
- Texas A&M Forest Service — Oak Wilt — The Feb 1 – Jun 30 oak pruning restriction and wound-painting guidance we follow.
- ANSI A300 (Part 1) — Pruning — The national standard our pruning cuts are made to, including the limits on live-canopy removal.
- International Society of Arboriculture — Certification body for arborists. Certifications carry a number the issuer will confirm.
- Tree Care Industry Association — Industry safety standards and accreditation.
- USDA Plant Hardiness Zone Map — North Central Texas sits in zones 8a–8b, which sets what will and will not establish here.
Prices are typical ranges for North Central Texas and are not a quote. Every job is quoted in writing after an on-site visit.
Need tree cutting in Cleburne?
Free written estimate, usually within a couple of business days. Licensed, insured, and we clean up completely.
Monday–Friday, 8:00 AM – 5:00 PM · Storm and hazard calls are answered outside office hours.