Tree Cutting Service in Burleson, Texas
Cutting down trees, cutting back limbs, and cutting up what has already fallen. Serving Burleson and the rest of Johnson County since 2014 — free written estimates, fully insured crews, and complete clean-up.
Do you provide tree cutting in Burleson, TX?
Tree Service Pros provides tree cutting in Burleson, Texas. Cutting down trees, cutting back limbs, and cutting up what has already fallen. Most Burleson jobs fall between $300 and $2,200. Estimates are free and in writing, the crew is insured, and Burleson is inside our regular Johnson County service area — call (817) 508-9940.
“Tree cutting” covers three different jobs, and the price gap between them is large. Sorting out which one you actually need is the first thing we do on site. With about 47,641 residents, Burleson has the mix we see most: established neighbourhoods with mature canopy, newer subdivisions with young trees that were never structurally pruned, and not much room between them.
Root plates here are wide and shallow because there is nowhere to go down — limestone is often less than two feet under the grass. It is why cutting a mature live oak in Burleson is a rigging job rather than a felling job on most residential lots.
- Service
- Tree Cutting
- Area
- BurlesonJohnson County
- Typical range
- $300–$2,200per job, varies by site
- Estimates
- Freewritten, no obligation
What is included in Burleson
- Felling where there is room to drop it whole
- Sectional cutting where there is not
- Cutting back limbs off roofs and fences
- Bucking and cutting up storm-fallen trees
- Firewood cut and stacked on request
At a glance
Tree Cutting in Burleson — the short version
| Service area | Burleson, Johnson County, Texas |
|---|---|
| Population | 47,641 |
| Soil | shallow alkaline clay over limestone (pH 7.8–8.3) |
| Common trees | live oak, cedar elm, Texas ash, Shumard oak |
| Most common problem | Iron chlorosis |
| ZIP codes | 76028, 76097 |
| Typical cost | $300–$2,200 |
| Oak pruning window | July – January |
Signs you need tree cutting in Burleson
- A tree you want gone but are unsure how it comes down
- Limbs to cut back off a structure
- A storm-fallen tree that needs bucking up
- Firewood you want cut and stacked
- Anything you were considering doing yourself with a chainsaw
Any of these is worth a free look. We will tell you honestly if it can wait.
Three jobs that all get called “tree cutting”
When somebody calls asking about tree cutting, they mean one of three things and the price range between them is roughly ten to one. Cutting a tree down is a removal. Cutting branches back is trimming — off a roof, away from a fence, up over a drive. Cutting up a tree that is already down is storm clean-up, and it is priced by volume and access rather than by height.
It is worth being specific when you call, because it changes what we bring. Cutting a sixty-foot dead red oak away from a house needs a rigging crew; bucking a fallen hackberry into rounds needs a saw and a truck.
The two-thirds rule for hiring
Do not pay in full up front. A deposit on a large job is normal; the balance is due on completion after you have walked it. Any crew asking for the whole amount in cash before starting is telling you something. Also get the scope in writing — 'trim the trees' is not a scope, and it is where nearly every dispute in this trade comes from.
How the job runs
Tree Cutting in Burleson, step by step
Tell us which of the three it is
Down, back, or up — it decides the crew and the equipment.
Site visit and written quote
Free, and it includes exactly what is being cut and what happens to the wood.
Utilities and access checked
Service drops, sprinkler lines, gate widths.
Cut in a planned sequence
Tension released deliberately; anything over a target roped rather than dropped.
Wood handled as agreed
Hauled, chipped, or cut to firewood length and stacked — your choice, priced up front.
Pricing
What tree cutting costs in Burleson
Most tree cutting work in Burleson falls between $300 and $2,200 for a typical residential job. That is a real range, not a teaser — what puts a job at one end or the other is below.
What moves the price
- Which of the three jobs it actually is
- Height, diameter and total wood volume
- Whether there is a clear drop zone
- What happens to the wood — haul-off is a real share of the cost
- Access and how far material has to be carried to the truck
The only way to get a real number is for someone to look at it. That visit is free — request an estimate or call (817) 508-9940. Full pricing detail for every service is in our North Texas tree service cost guide.
Local conditions
Burleson soil, species and timing
Tree work in Burleson is shaped by the soil more than anything else. Root plates here are wide and shallow because there is nowhere to go down — limestone is often less than two feet under the grass. The species that handle it — live oak, cedar elm, Texas ash — are the ones you see on every mature street, and iron chlorosis is their recurring problem.
We cover ZIP codes 76028 and 76097. Because we are already working nearby, scheduling in Burleson is usually easy — Briaroaks (1 mi), Cross Timber (1 mi), Joshua (4 mi) and Crowley (6 mi) are all on the same route.
Timing oak work in Burleson
Oak wilt is present across North Central Texas, and the single most important rule is timing: the Texas A&M Forest Service advises against pruning oaks between February 1 and June 30, when sap-feeding beetles are active and fresh cuts are how the fungus gets in. If an oak has to be cut in that window — storm damage does not wait — every wound gets painted immediately. We schedule non-urgent oak work in July through January.
People in Burleson search for this as cut down a tree, limb cutting, or simply tree cutting service in Burleson — it is all the same job, and the estimate is free either way.
Timing
Tree care calendar for Burleson
| When | What matters |
|---|---|
| Jan–Feb | Best window of the year for structural pruning. Trees are dormant, the framework is visible with the leaves off, and crews are less booked. |
| Feb 1–Jun 30 | Do not prune oaks. Paint any unavoidable wound immediately — storm damage included. |
| Mar–May | Storm season. Straight-line winds find weak unions first. Deadwood and over-extended limbs are worth clearing before it starts. |
| Jun–Aug | Heat and drought stress. Water deeply and infrequently; the thin soil over limestone here dries from the bottom up. Watch for iron chlorosis. |
| Sep–Oct | Root growth restarts as soil cools — the best planting window and a good time for soil correction. |
| Nov–Dec | Leaves down, structure visible. Removals are cheapest now: lighter canopy, firmer ground, less rigging. |
Straight answers
Tree Cutting in Burleson — straight answers
What does tree cutting cost in Burleson?
Most Burleson jobs run $300–$2,200. Access moves this more than tree size does.
Do you cover Burleson?
Yes — Burleson is in Johnson County, inside our regular route, 18 miles from our Fort Worth base. Estimates are free and usually within a couple of business days.
When is the right time of year?
Late summer through winter for most work. On oaks it is not optional — nothing between February 1 and June 30, because of oak wilt.
Are you licensed and insured?
General liability and workers' compensation, certificate sent before you book. Texas does not license tree services, which is why that question matters more here than elsewhere.
FAQ
Tree Cutting in Burleson — questions we get asked
How much does it cost to cut down a tree in Burleson?
Small trees under about 25 feet usually run $300–$650. Mid-size trees of 25–50 feet are commonly $650–$1,500. Large trees over 50 feet, or anything requiring rigging over a house, generally start around $1,500 and go up with size and difficulty. Stump grinding and haul-off are separate line items.
Will you leave the wood for firewood?
Happily — say so when we quote. Leaving rounds on site reduces the price because we are not hauling the volume. We can cut to a length you specify and stack it, which adds a little labour but is usually still cheaper than haul-off.
What payment methods do you take?
All standard forms — card, check, cash and bank transfer. On larger jobs a deposit is normal with the balance due on completion, after you have seen the finished work. We do not ask for payment in full before starting.
Do you give free estimates in Burleson?
Yes. Someone comes out, looks at the tree, and you get a written price with the scope spelled out — no charge and no obligation. We do not quote tree work over the phone from a description, because the things that change the price (access, what is underneath, how the wood has to come out) are not visible from a description.
Can you work near power lines?
Up to a point. Anything in contact with a service drop or a primary conductor is the utility's to clear first — we do not cut energised lines and neither should anyone who is not a qualified line-clearance crew. We handle everything outside those clearances.
Do you serve areas outside Burleson?
Yes — our regular territory covers Tarrant, Johnson, Parker, Hill and Bosque Counties and the cities inside them. Burleson is on our normal route.
Will you damage my lawn or sprinkler system?
We plate or mat soft ground before anything heavy crosses it, and we ask you to flag sprinkler heads and low-voltage lighting, which do not show up on a utility locate. Some rutting is possible on saturated ground — if it happens, repairing it is on us.
Are you licensed and insured to work in Burleson?
We carry general liability and workers' compensation, and we will send the certificate before you book — not after. Texas does not license tree services at state level, which is exactly why the insurance question matters: if an uninsured crew damages your property or injures someone on it, that lands on your homeowner's policy.
Other tree services we provide in Burleson
Root Barriers in Burleson
Redirecting roots away from foundations, drives and pools — without killing the tree.
Learn more →Commercial Tree Service in Burleson
Property-wide tree work for HOAs, commercial sites, churches and municipalities.
Learn more →Tree Pruning in Burleson
Structural and health pruning — the cuts that change how a tree grows.
Learn more →Tree Trimming in Burleson
Crown cleaning, raising, thinning and deadwood removal on an ANSI A300 standard.
Learn more →Tree Disease Treatment in Burleson
Diagnosis and treatment for the diseases that actually kill North Texas trees.
Learn more →Emergency Tree Service in Burleson
Storm response for trees on houses, drives, fences and power drops.
Learn more →Tree Cutting near Burleson
We cover the whole corridor, so a job in Burleson is rarely a special trip.
See all cities in Johnson County, or our full service area map. Looking for tree cutting across the whole region? See Tree Cutting Service.
Standards and sources we work to
- Texas A&M Forest Service — Oak Wilt — The Feb 1 – Jun 30 oak pruning restriction and wound-painting guidance we follow.
- ANSI A300 (Part 1) — Pruning — The national standard our pruning cuts are made to, including the limits on live-canopy removal.
- International Society of Arboriculture — Certification body for arborists. Certifications carry a number the issuer will confirm.
- Tree Care Industry Association — Industry safety standards and accreditation.
- USDA Plant Hardiness Zone Map — North Central Texas sits in zones 8a–8b, which sets what will and will not establish here.
Prices are typical ranges for North Central Texas and are not a quote. Every job is quoted in writing after an on-site visit.
Need tree cutting in Burleson?
Free written estimate, usually within a couple of business days. Licensed, insured, and we clean up completely.
Monday–Friday, 8:00 AM – 5:00 PM · Storm and hazard calls are answered outside office hours.