Shrub & Hedge Trimming in Cleburne, Texas
Shaping, thinning and renewing the shrubs and hedges around the house. Serving Cleburne and the rest of Johnson County since 2014 — free written estimates, fully insured crews, and complete clean-up.
Do you provide shrub and hedge trimming in Cleburne, TX?
Shrub & Hedge Trimming in Cleburne, Texas. Shaping, thinning and renewing the shrubs and hedges around the house. Most Cleburne jobs fall between $150 and $850. Tree Service Pros has worked Johnson County since 2014. Free written estimate, full clean-up included, and no work starts without your sign-off.
We have been doing shrub & hedge trimming work in and around Cleburne since 2014. Foundation shrubs live in the hardest microclimate on a property — reflected heat off brick, compacted builder's fill, and irrigation zoned for turf rather than woody plants. Most of what looks like disease is really shearing and water.
The ground under Cleburne is shallow alkaline clay over limestone, typical of the Fort Worth Prairie. Soil pH runs around 7.8–8.3, which is why iron chlorosis shows up here so consistently — high soil pH locks up iron and manganese, so red oaks and maples yellow between the veins while the veins stay green.
- Service
- Shrub & Hedge Trimming
- Area
- CleburneJohnson County
- Typical range
- $150–$850per job, varies by site
- Estimates
- Freewritten, no obligation
What is included in Cleburne
- Formal hedge shaping and screen maintenance
- Renewal pruning on overgrown foundation shrubs
- Thinning for air movement and light
- Bloom-safe timing so you do not cut off next season's flowers
- Full clean-up and haul-off
At a glance
Shrub & Hedge Trimming in Cleburne — the short version
| Service area | Cleburne, Johnson County, Texas |
|---|---|
| Population | 31,352 |
| Soil | shallow alkaline clay over limestone (pH 7.8–8.3) |
| Common trees | live oak, cedar elm, Texas ash, Shumard oak |
| Most common problem | Iron chlorosis |
| ZIP codes | 76031, 76033 |
| Typical cost | $150–$850 |
| Oak pruning window | July – January |
Signs you need shrub and hedge trimming in Cleburne
- A hedge that has gone bare and woody at the bottom
- Shrubs grown up over windows or blocking a walk
- Foundation plants pressing against brick or siding
- Bare, dead interior under a green shell
- Shrubs that stopped flowering after being sheared
Any of these is worth a free look. We will tell you honestly if it can wait.
Shearing is not pruning, and it is why hedges go hollow
Running a hedge trimmer over the outside of a shrub every few months feels like maintenance, but it creates a dense shell of growth that shades out everything inside. The interior thins, then dies, and eventually you have a green box with nothing but bare sticks under the surface. Cut it back at that point and there is no live growth left to respond.
The fix is thinning alongside shaping — reaching inside and removing whole stems at the base so light and air reach the interior. On badly overgrown shrubs, renewal pruning takes about a third of the oldest stems to the ground each year for three years, rebuilding the plant without ever leaving it looking butchered.
Timing decides whether you get flowers
Spring bloomers — azalea, forsythia, quince, spirea, climbing roses — set next year's buds soon after they finish flowering. Shear them in autumn or winter and you are cutting off the entire display. Prune those right after they bloom. Summer bloomers like crape myrtle and althea flower on new growth and are pruned in late winter. And crape myrtles do not need topping — that is the same mistake as topping a tree, just smaller.
How the job runs
Shrub & Hedge Trimming in Cleburne, step by step
Identify what you actually have
Bloom timing decides the schedule, and half the shrubs we are asked to cut are on the wrong one.
Thin before you shape
Whole stems out at the base first, so light reaches the interior and the plant stays green inside.
Shape to a taper
Wider at the bottom than the top. A hedge cut straight-sided or wider at the top shades its own base and goes bare at the bottom.
Respect the limits
No more than about a third of the plant in one season, and never into bare wood on conifers — junipers do not regrow from brown.
Clean up completely
Clippings hauled, beds blown, and the plants left looking deliberate rather than shorn.
Pricing
What shrub and hedge trimming costs in Cleburne
Most shrub & hedge trimming work in Cleburne falls between $150 and $850 for a typical residential job. That is a real range, not a teaser — what puts a job at one end or the other is below.
What moves the price
- Number of shrubs and total linear feet of hedge
- How overgrown they are — renewal work takes far longer than upkeep
- Height, and whether ladders or a lift are needed
- Whether clippings are hauled or left
- Access, especially in fenced back yards
The only way to get a real number is for someone to look at it. That visit is free — request an estimate or call (817) 508-9940. Full pricing detail for every service is in our North Texas tree service cost guide.
Local conditions
Cleburne soil, species and timing
The ground under Cleburne is shallow alkaline clay over limestone, typical of the Fort Worth Prairie. Soil pH runs around 7.8–8.3, which is why iron chlorosis shows up here so consistently — high soil pH locks up iron and manganese, so red oaks and maples yellow between the veins while the veins stay green.
We cover ZIP codes 76031 and 76033. We are regularly within a few minutes of Cleburne: Keene (4 mi), Coyote Flats (7 mi), Joshua (7 mi) and Rio Vista (8 mi) are all on the same route.
People in Cleburne search for this as shrub pruning, hedge trimming near me, or simply bush trimming service in Cleburne — it is all the same job, and the estimate is free either way.
Timing
Tree care calendar for Cleburne
| When | What matters |
|---|---|
| Jan–Feb | Best window of the year for structural pruning. Trees are dormant, the framework is visible with the leaves off, and crews are less booked. |
| Feb 1–Jun 30 | Do not prune oaks. Paint any unavoidable wound immediately — storm damage included. |
| Mar–May | Storm season. Straight-line winds find weak unions first. Deadwood and over-extended limbs are worth clearing before it starts. |
| Jun–Aug | Heat and drought stress. Water deeply and infrequently; the thin soil over limestone here dries from the bottom up. Watch for iron chlorosis. |
| Sep–Oct | Root growth restarts as soil cools — the best planting window and a good time for soil correction. |
| Nov–Dec | Leaves down, structure visible. Removals are cheapest now: lighter canopy, firmer ground, less rigging. |
Straight answers
Shrub & Hedge Trimming in Cleburne — straight answers
What does shrub and hedge trimming cost in Cleburne?
Most Cleburne jobs run $150–$850. Access moves this more than tree size does.
Do you cover Cleburne?
Yes — Cleburne is in Johnson County, inside our regular route, 28 miles from our Fort Worth base. Estimates are free and usually within a couple of business days.
When is the right time of year?
Late summer through winter for most work. On oaks it is not optional — nothing between February 1 and June 30, because of oak wilt.
Are you licensed and insured?
General liability and workers' compensation, certificate sent before you book. Texas does not license tree services, which is why that question matters more here than elsewhere.
FAQ
Shrub & Hedge Trimming in Cleburne — questions we get asked
When should I trim shrubs in Cleburne?
It depends on when they bloom. Spring-flowering shrubs (azalea, forsythia, quince, spirea) are pruned right after they finish, because they set next year's buds soon after. Summer bloomers (crape myrtle, althea, roses) are pruned in late winter. Evergreen hedges can be shaped through the growing season, but avoid heavy cutting in the heat of a Cleburne August.
Can an overgrown hedge be saved?
Usually, yes — with renewal pruning rather than one hard cut. We take about a third of the oldest stems to the ground each year for three years, which rebuilds the plant from the inside without ever leaving a bare box. The exception is junipers and most conifers: they do not regrow from bare wood, so once they are hollow, replacing is the honest answer.
How soon can you get to my property in Cleburne?
Estimates in Cleburne are usually within a couple of business days. Scheduled work typically runs one to two weeks out depending on season — spring and post-storm periods are busiest. Hazard situations get moved to the front of the queue.
Do I need to be home while you work?
No, as long as we have access and have already walked the job with you. Plenty of Cleburne customers are at work while we are there. We will call before we start and send photos when we finish.
Do you clean up afterwards?
Completely. Brush chipped and hauled, wood removed or stacked as you prefer, ground raked and blown off. We walk the site with you before we leave. Clean-up is included in the quoted price — it is not a line item that appears later.
What happens to the wood chips?
They leave with us by default. If you want them, say so — chip is good mulch, it is free, and it is better for beds than most of what is sold in bags. Just keep it off the trunk.
What payment methods do you take?
All standard forms — card, check, cash and bank transfer. On larger jobs a deposit is normal with the balance due on completion, after you have seen the finished work. We do not ask for payment in full before starting.
Can you work near power lines?
Up to a point. Anything in contact with a service drop or a primary conductor is the utility's to clear first — we do not cut energised lines and neither should anyone who is not a qualified line-clearance crew. We handle everything outside those clearances.
Other tree services we provide in Cleburne
Stump Grinding in Cleburne
Grinding stumps 6–12 inches below grade so the ground can be re-used.
Learn more →Land Clearing in Cleburne
Clearing brush, scrub and trees off building pads, pasture and fence lines.
Learn more →Tree Pruning in Cleburne
Structural and health pruning — the cuts that change how a tree grows.
Learn more →Emergency Tree Service in Cleburne
Storm response for trees on houses, drives, fences and power drops.
Learn more →Certified Arborist in Cleburne
A credentialed opinion on whether a tree is safe, sick, or fine as it is.
Learn more →Tree Cutting in Cleburne
Cutting down trees, cutting back limbs, and cutting up what has already fallen.
Learn more →Shrub & Hedge Trimming near Cleburne
We cover the whole corridor, so a job in Cleburne is rarely a special trip.
See all cities in Johnson County, or our full service area map. Looking for shrub & hedge trimming across the whole region? See Shrub & Hedge Trimming.
Standards and sources we work to
- Texas A&M Forest Service — Oak Wilt — The Feb 1 – Jun 30 oak pruning restriction and wound-painting guidance we follow.
- ANSI A300 (Part 1) — Pruning — The national standard our pruning cuts are made to, including the limits on live-canopy removal.
- International Society of Arboriculture — Certification body for arborists. Certifications carry a number the issuer will confirm.
- Tree Care Industry Association — Industry safety standards and accreditation.
- USDA Plant Hardiness Zone Map — North Central Texas sits in zones 8a–8b, which sets what will and will not establish here.
Prices are typical ranges for North Central Texas and are not a quote. Every job is quoted in writing after an on-site visit.
Need shrub and hedge trimming in Cleburne?
Free written estimate, usually within a couple of business days. Licensed, insured, and we clean up completely.
Monday–Friday, 8:00 AM – 5:00 PM · Storm and hazard calls are answered outside office hours.