Stump Grinding & Stump Removal in Cleburne, Texas
Grinding stumps 6–12 inches below grade so the ground can be re-used. Serving Cleburne and the rest of Johnson County since 2014 — free written estimates, fully insured crews, and complete clean-up.
Do you provide stump grinding in Cleburne, TX?
Stump Grinding & Stump Removal in Cleburne, Texas. Grinding stumps 6–12 inches below grade so the ground can be re-used. Most Cleburne jobs fall between $95 and $600. Tree Service Pros has worked Johnson County since 2014. Free written estimate, full clean-up included, and no work starts without your sign-off.
We have been doing stump grinding work in and around Cleburne since 2014. A stump left in the ground is a trip hazard, a mower-killer and a termite and Ganoderma host. Grinding is far cheaper than excavating the root plate.
Root plates here are wide and shallow because there is nowhere to go down — limestone is often less than two feet under the grass. That matters for grinding: in Cleburne the roots run wide and shallow rather than deep, so surface roots often need taking down along with the stump.
- Service
- Stump Grinding
- Area
- CleburneJohnson County
- Typical range
- $95–$600per job, varies by site
- Estimates
- Freewritten, no obligation
What is included in Cleburne
- Ground 6–12 in. below grade for replanting or sod
- Surface-root grinding along walks and drives
- Chip backfill or full haul-off — your call
- Narrow-access machines for gated back yards
- Utility locate before every grind
At a glance
Stump Grinding in Cleburne — the short version
| Service area | Cleburne, Johnson County, Texas |
|---|---|
| Population | 31,352 |
| Soil | shallow alkaline clay over limestone (pH 7.8–8.3) |
| Common trees | live oak, cedar elm, Texas ash, Shumard oak |
| Most common problem | Iron chlorosis |
| ZIP codes | 76031, 76033 |
| Typical cost | $95–$600 |
| Oak pruning window | July – January |
Signs you need stump grinding in Cleburne
- A stump you keep catching the mower on
- Mushrooms fruiting on old stump wood near the house
- Surface roots lifting a walk or drive
- Wanting to replant, re-sod or build over the spot
- Termite activity in decaying stump wood
Any of these is worth a free look. We will tell you honestly if it can wait.
Grinding versus digging a stump out
Grinding uses a carbide wheel to chew the stump into mulch, typically six to twelve inches below grade — deep enough to plant grass over, and deep enough for most replanting if you cut a fresh hole beside it rather than in it. Excavating the whole root plate with a machine costs several times as much, wrecks the surrounding lawn, and is only necessary if you are pouring a foundation or a pool over the spot.
The by-product is a surprising amount of chip. A stump grinds into roughly twice the volume of the stump itself, mounded over the hole. You can leave it as backfill — it settles over a season — or we haul it and bring in topsoil. Decide before we start; it changes the price.
Always locate before grinding
Stump grinders cut below grade, and irrigation lines, low-voltage lighting, gas service and cable drops all live at exactly that depth. Every grind we do starts with an 811 locate for public utilities, and we ask you to flag private lines — sprinkler heads and landscape lighting are not on the locate.
How the job runs
Stump Grinding in Cleburne, step by step
Confirm depth and finish
Replanting, sod, or just level? That sets how deep we go.
Locate utilities
811 ticket for public lines; you flag sprinklers and lighting.
Protect the surrounds
Screens and mats — grinding throws chip and the occasional stone a long way.
Grind past the flare
Down to depth and out to the buttress roots, not just the visible stump.
Backfill or haul
Chip raked back in and topped off, or removed and replaced with topsoil ready for seed.
Pricing
What stump grinding costs in Cleburne
Most stump grinding work in Cleburne falls between $95 and $600 for a typical residential job. That is a real range, not a teaser — what puts a job at one end or the other is below.
What moves the price
- Stump diameter measured at the widest point of the flare, not the cut face
- Grinding depth — replanting depth costs more than level-with-grade
- Access; a walk-behind grinder through a narrow gate is slower
- Whether chip is backfilled or hauled off and replaced with soil
- Rock or embedded metal — old fence line stumps are frequently full of wire
The only way to get a real number is for someone to look at it. That visit is free — request an estimate or call (817) 508-9940. Full pricing detail for every service is in our North Texas tree service cost guide.
Local conditions
Cleburne soil, species and timing
Cleburne sits on thin, rocky alkaline clay over limestone bedrock — Fort Worth Prairie ground. That drives what grows well here (live oak, cedar elm and Texas ash dominate the older streets) and what goes wrong: iron chlorosis is the condition we are called out for most.
We cover ZIP codes 76031 and 76033. We are regularly within a few minutes of Cleburne: Keene (4 mi), Coyote Flats (7 mi), Joshua (7 mi) and Rio Vista (8 mi) are all on the same route.
People in Cleburne search for this as stump grinder, stump removal service, or simply stump removal in Cleburne — it is all the same job, and the estimate is free either way.
Timing
Tree care calendar for Cleburne
| When | What matters |
|---|---|
| Jan–Feb | Best window of the year for structural pruning. Trees are dormant, the framework is visible with the leaves off, and crews are less booked. |
| Feb 1–Jun 30 | Do not prune oaks. Paint any unavoidable wound immediately — storm damage included. |
| Mar–May | Storm season. Straight-line winds find weak unions first. Deadwood and over-extended limbs are worth clearing before it starts. |
| Jun–Aug | Heat and drought stress. Water deeply and infrequently; the thin soil over limestone here dries from the bottom up. Watch for iron chlorosis. |
| Sep–Oct | Root growth restarts as soil cools — the best planting window and a good time for soil correction. |
| Nov–Dec | Leaves down, structure visible. Removals are cheapest now: lighter canopy, firmer ground, less rigging. |
Straight answers
Stump Grinding in Cleburne — straight answers
What does stump grinding cost in Cleburne?
Most Cleburne jobs run $95–$600. Access moves this more than tree size does.
Do you cover Cleburne?
Yes — Cleburne is in Johnson County, inside our regular route, 28 miles from our Fort Worth base. Estimates are free and usually within a couple of business days.
When is the right time of year?
Late summer through winter for most work. On oaks it is not optional — nothing between February 1 and June 30, because of oak wilt.
Are you licensed and insured?
General liability and workers' compensation, certificate sent before you book. Texas does not license tree services, which is why that question matters more here than elsewhere.
FAQ
Stump Grinding in Cleburne — questions we get asked
Can I plant a new tree where the old stump was in Cleburne?
Not directly in the same hole. Even ground to twelve inches, the remaining root mass decays for years, robs nitrogen as it does, and leaves a void that settles. Plant three to four feet to the side, or grind deep and excavate the chip out and replace with topsoil if the location matters.
Do you remove the roots as well as the stump?
Grinding takes the stump and the surface roots radiating from it. It does not chase lateral roots across the yard — those decay in place over several years and are rarely a problem. If you are building over the spot, tell us and we will price full root-plate excavation instead.
Do I need to be home while you work?
No, as long as we have access and have already walked the job with you. Plenty of Cleburne customers are at work while we are there. We will call before we start and send photos when we finish.
Can you work around my schedule?
Usually. Most residential work happens on weekdays during business hours, but we can often arrange early starts or a specific day if access, pets or gates require it. Commercial properties routinely get after-hours or weekend scheduling.
Are you licensed and insured to work in Cleburne?
We carry general liability and workers' compensation, and we will send the certificate before you book — not after. Texas does not license tree services at state level, which is exactly why the insurance question matters: if an uninsured crew damages your property or injures someone on it, that lands on your homeowner's policy.
Can you work near power lines?
Up to a point. Anything in contact with a service drop or a primary conductor is the utility's to clear first — we do not cut energised lines and neither should anyone who is not a qualified line-clearance crew. We handle everything outside those clearances.
What happens if it rains on my scheduled day?
We reschedule. Saturated ground means ruts and, more importantly, compromised anchor points and footing — nobody should be aloft in a tree in a North Texas thunderstorm. You get a call, not a no-show.
Do you clean up afterwards?
Completely. Brush chipped and hauled, wood removed or stacked as you prefer, ground raked and blown off. We walk the site with you before we leave. Clean-up is included in the quoted price — it is not a line item that appears later.
Other tree services we provide in Cleburne
Tree Pruning in Cleburne
Structural and health pruning — the cuts that change how a tree grows.
Learn more →Land Clearing in Cleburne
Clearing brush, scrub and trees off building pads, pasture and fence lines.
Learn more →Tree Removal in Cleburne
Safe, insured removal of dead, dying, damaged or badly-placed trees.
Learn more →Tree Trimming in Cleburne
Crown cleaning, raising, thinning and deadwood removal on an ANSI A300 standard.
Learn more →Root Barriers in Cleburne
Redirecting roots away from foundations, drives and pools — without killing the tree.
Learn more →Shrub & Hedge Trimming in Cleburne
Shaping, thinning and renewing the shrubs and hedges around the house.
Learn more →Stump Grinding near Cleburne
We cover the whole corridor, so a job in Cleburne is rarely a special trip.
See all cities in Johnson County, or our full service area map. Looking for stump grinding across the whole region? See Stump Grinding & Stump Removal.
Standards and sources we work to
- Texas A&M Forest Service — Oak Wilt — The Feb 1 – Jun 30 oak pruning restriction and wound-painting guidance we follow.
- ANSI A300 (Part 1) — Pruning — The national standard our pruning cuts are made to, including the limits on live-canopy removal.
- International Society of Arboriculture — Certification body for arborists. Certifications carry a number the issuer will confirm.
- Tree Care Industry Association — Industry safety standards and accreditation.
- USDA Plant Hardiness Zone Map — North Central Texas sits in zones 8a–8b, which sets what will and will not establish here.
Prices are typical ranges for North Central Texas and are not a quote. Every job is quoted in writing after an on-site visit.
Need stump grinding in Cleburne?
Free written estimate, usually within a couple of business days. Licensed, insured, and we clean up completely.
Monday–Friday, 8:00 AM – 5:00 PM · Storm and hazard calls are answered outside office hours.