Tree Cutting Service in Malone, Texas
Cutting down trees, cutting back limbs, and cutting up what has already fallen. Serving Malone and the rest of Hill County since 2014 — free written estimates, fully insured crews, and complete clean-up.
Do you provide tree cutting in Malone, TX?
Tree Cutting Service in Malone, Texas. Cutting down trees, cutting back limbs, and cutting up what has already fallen. Most Malone jobs fall between $300 and $2,200. Tree Service Pros has worked Hill County since 2014. Free written estimate, full clean-up included, and no work starts without your sign-off.
We have been doing tree cutting work in and around Malone since 2014. “Tree cutting” covers three different jobs, and the price gap between them is large. Sorting out which one you actually need is the first thing we do on site.
Drainage is the recurring problem — water sits, roots suffocate, and Phytophthora gets into a root collar that never dries. It is why cutting a mature bur oak in Malone is a rigging job rather than a felling job on most residential lots.
- Service
- Tree Cutting
- Area
- MaloneHill County
- Typical range
- $300–$2,200per job, varies by site
- Estimates
- Freewritten, no obligation
What is included in Malone
- Felling where there is room to drop it whole
- Sectional cutting where there is not
- Cutting back limbs off roofs and fences
- Bucking and cutting up storm-fallen trees
- Firewood cut and stacked on request
At a glance
Tree Cutting in Malone — the short version
| Service area | Malone, Hill County, Texas |
|---|---|
| Population | 237 |
| Soil | deep black shrink-swell clay (pH 7.4–8.2) |
| Common trees | bur oak, cedar elm, pecan, Shumard oak |
| Most common problem | Shrink-swell root damage |
| ZIP codes | 76660 |
| Typical cost | $300–$2,200 |
| Oak pruning window | July – January |
Signs you need tree cutting in Malone
- A tree you want gone but are unsure how it comes down
- Limbs to cut back off a structure
- A storm-fallen tree that needs bucking up
- Firewood you want cut and stacked
- Anything you were considering doing yourself with a chainsaw
Any of these is worth a free look. We will tell you honestly if it can wait.
Three jobs that all get called “tree cutting”
When somebody calls asking about tree cutting, they mean one of three things and the price range between them is roughly ten to one. Cutting a tree down is a removal. Cutting branches back is trimming — off a roof, away from a fence, up over a drive. Cutting up a tree that is already down is storm clean-up, and it is priced by volume and access rather than by height.
Pricing
What tree cutting costs in Malone
Most tree cutting work in Malone falls between $300 and $2,200 for a typical residential job. That is a real range, not a teaser — what puts a job at one end or the other is below.
What moves the price
- Which of the three jobs it actually is
- Height, diameter and total wood volume
- Whether there is a clear drop zone
- What happens to the wood — haul-off is a real share of the cost
- Access and how far material has to be carried to the truck
The only way to get a real number is for someone to look at it. That visit is free — request an estimate or call (817) 508-9940. Full pricing detail for every service is in our North Texas tree service cost guide.
Local conditions
Malone soil, species and timing
The blackland prairie runs under Malone: deep, expansive black clay. Mature canopy here is mostly bur oak and cedar elm, with Shumard oak where there is more depth. Drainage is the recurring problem — water sits, roots suffocate, and Phytophthora gets into a root collar that never dries.
We cover ZIP code 76660. We are regularly within a few minutes of Malone: Penelope (4 mi), Irene (5 mi), Bynum (7 mi) and Hubbard (7 mi) are all on the same route.
Timing oak work in Malone
Oak wilt is present across North Central Texas, and the single most important rule is timing: the Texas A&M Forest Service advises against pruning oaks between February 1 and June 30, when sap-feeding beetles are active and fresh cuts are how the fungus gets in. If an oak has to be cut in that window — storm damage does not wait — every wound gets painted immediately. We schedule non-urgent oak work in July through January.
People in Malone search for this as tree felling, tree cutters, or simply tree cutting service in Malone — it is all the same job, and the estimate is free either way.
Timing
Tree care calendar for Malone
| When | What matters |
|---|---|
| Jan–Feb | Dormant pruning, and the one time heavy equipment can cross this clay without rutting it. |
| Feb 1–Jun 30 | No oak pruning. Bur and Shumard oaks dominate here and both are worth protecting. |
| Mar–May | The clay swells and holds water. Root rot and Phytophthora show up now, and saturated ground brings whole trees over. |
| Jun–Aug | The clay shrinks and cracks, shearing feeder roots and drying the root zone from below. This is what most summer decline here actually is. |
| Sep–Oct | Best planting window. Dig wide, never deep, and never amend the backfill in this soil. |
| Nov–Dec | Removals and structural work while the ground is firm and the canopy light. |
Straight answers
Tree Cutting in Malone — straight answers
What does tree cutting cost in Malone?
Most Malone jobs run $300–$2,200. Access moves this more than tree size does.
Do you cover Malone?
Yes — Malone is in Hill County, inside our regular route, 63 miles from our Fort Worth base. Estimates are free and usually within a couple of business days.
When is the right time of year?
Late summer through winter for most work. On oaks it is not optional — nothing between February 1 and June 30, because of oak wilt.
Are you licensed and insured?
General liability and workers' compensation, certificate sent before you book. Texas does not license tree services, which is why that question matters more here than elsewhere.
FAQ
Tree Cutting in Malone — questions we get asked
How much does it cost to cut down a tree in Malone?
Small trees under about 25 feet usually run $300–$650. Mid-size trees of 25–50 feet are commonly $650–$1,500. Large trees over 50 feet, or anything requiring rigging over a house, generally start around $1,500 and go up with size and difficulty. Stump grinding and haul-off are separate line items.
Will you leave the wood for firewood?
Happily — say so when we quote. Leaving rounds on site reduces the price because we are not hauling the volume. We can cut to a length you specify and stack it, which adds a little labour but is usually still cheaper than haul-off.
Do I need to be home while you work?
No, as long as we have access and have already walked the job with you. Plenty of Malone customers are at work while we are there. We will call before we start and send photos when we finish.
Is there a minimum charge?
There is a practical minimum because getting a crew and equipment to Malone costs the same whether the job takes one hour or four. If you have several small jobs, bundling them into one visit is much better value.
How soon can you get to my property in Malone?
Estimates in Malone are usually within a couple of business days. Scheduled work typically runs one to two weeks out depending on season — spring and post-storm periods are busiest. Hazard situations get moved to the front of the queue.
Other tree services we provide in Malone
Tree Pruning in Malone
Structural and health pruning — the cuts that change how a tree grows.
Learn more →Land Clearing in Malone
Clearing brush, scrub and trees off building pads, pasture and fence lines.
Learn more →Stump Grinding in Malone
Grinding stumps 6–12 inches below grade so the ground can be re-used.
Learn more →Tree Removal in Malone
Safe, insured removal of dead, dying, damaged or badly-placed trees.
Learn more →Tree Trimming in Malone
Crown cleaning, raising, thinning and deadwood removal on an ANSI A300 standard.
Learn more →Root Barriers in Malone
Redirecting roots away from foundations, drives and pools — without killing the tree.
Learn more →Tree Cutting near Malone
We cover the whole corridor, so a job in Malone is rarely a special trip.
See all cities in Hill County, or our full service area map. Looking for tree cutting across the whole region? See Tree Cutting Service.
Standards and sources we work to
- Texas A&M Forest Service — Oak Wilt — The Feb 1 – Jun 30 oak pruning restriction and wound-painting guidance we follow.
- ANSI A300 (Part 1) — Pruning — The national standard our pruning cuts are made to, including the limits on live-canopy removal.
- International Society of Arboriculture — Certification body for arborists. Certifications carry a number the issuer will confirm.
- Tree Care Industry Association — Industry safety standards and accreditation.
- USDA Plant Hardiness Zone Map — North Central Texas sits in zones 8a–8b, which sets what will and will not establish here.
Prices are typical ranges for North Central Texas and are not a quote. Every job is quoted in writing after an on-site visit.
Need tree cutting in Malone?
Free written estimate, usually within a couple of business days. Licensed, insured, and we clean up completely.
Monday–Friday, 8:00 AM – 5:00 PM · Storm and hazard calls are answered outside office hours.