Stump Grinding & Stump Removal in Malone, Texas
Grinding stumps 6–12 inches below grade so the ground can be re-used. Serving Malone and the rest of Hill County since 2014 — free written estimates, fully insured crews, and complete clean-up.
Do you provide stump grinding in Malone, TX?
Tree Service Pros provides stump grinding in Malone, Texas. Grinding stumps 6–12 inches below grade so the ground can be re-used. Most Malone jobs fall between $95 and $600. Estimates are free and in writing, the crew is insured, and Malone is inside our regular Hill County service area — call (817) 508-9940.
A stump left in the ground is a trip hazard, a mower-killer and a termite and Ganoderma host. Grinding is far cheaper than excavating the root plate. Malone is a small community in Hill County, about 63 miles from Fort Worth and 4 from Penelope. We are out this way regularly.
Drainage is the recurring problem — water sits, roots suffocate, and Phytophthora gets into a root collar that never dries. That matters for grinding: in Malone the roots run wide and shallow rather than deep, so surface roots often need taking down along with the stump.
- Service
- Stump Grinding
- Area
- MaloneHill County
- Typical range
- $95–$600per job, varies by site
- Estimates
- Freewritten, no obligation
What is included in Malone
- Ground 6–12 in. below grade for replanting or sod
- Surface-root grinding along walks and drives
- Chip backfill or full haul-off — your call
- Narrow-access machines for gated back yards
- Utility locate before every grind
At a glance
Stump Grinding in Malone — the short version
| Service area | Malone, Hill County, Texas |
|---|---|
| Population | 237 |
| Soil | deep black shrink-swell clay (pH 7.4–8.2) |
| Common trees | bur oak, cedar elm, pecan, Shumard oak |
| Most common problem | Shrink-swell root damage |
| ZIP codes | 76660 |
| Typical cost | $95–$600 |
| Oak pruning window | July – January |
Signs you need stump grinding in Malone
- A stump you keep catching the mower on
- Mushrooms fruiting on old stump wood near the house
- Surface roots lifting a walk or drive
- Wanting to replant, re-sod or build over the spot
- Termite activity in decaying stump wood
Any of these is worth a free look. We will tell you honestly if it can wait.
Grinding versus digging a stump out
Grinding uses a carbide wheel to chew the stump into mulch, typically six to twelve inches below grade — deep enough to plant grass over, and deep enough for most replanting if you cut a fresh hole beside it rather than in it. Excavating the whole root plate with a machine costs several times as much, wrecks the surrounding lawn, and is only necessary if you are pouring a foundation or a pool over the spot.
Pricing
What stump grinding costs in Malone
Most stump grinding work in Malone falls between $95 and $600 for a typical residential job. That is a real range, not a teaser — what puts a job at one end or the other is below.
What moves the price
- Stump diameter measured at the widest point of the flare, not the cut face
- Grinding depth — replanting depth costs more than level-with-grade
- Access; a walk-behind grinder through a narrow gate is slower
- Whether chip is backfilled or hauled off and replaced with soil
- Rock or embedded metal — old fence line stumps are frequently full of wire
The only way to get a real number is for someone to look at it. That visit is free — request an estimate or call (817) 508-9940. Full pricing detail for every service is in our North Texas tree service cost guide.
Local conditions
Malone soil, species and timing
Tree work in Malone is shaped by the soil more than anything else. Drainage is the recurring problem — water sits, roots suffocate, and Phytophthora gets into a root collar that never dries. The species that handle it — bur oak, cedar elm, pecan — are the ones you see on every mature street, and shrink-swell root damage is their recurring problem.
We cover ZIP code 76660. Because we are already working nearby, scheduling in Malone is usually easy — Penelope (4 mi), Irene (5 mi), Bynum (7 mi) and Hubbard (7 mi) are all on the same route.
People in Malone search for this as stump grinder, stump removal service, or simply stump removal in Malone — it is all the same job, and the estimate is free either way.
Timing
Tree care calendar for Malone
| When | What matters |
|---|---|
| Jan–Feb | Dormant pruning, and the one time heavy equipment can cross this clay without rutting it. |
| Feb 1–Jun 30 | No oak pruning. Bur and Shumard oaks dominate here and both are worth protecting. |
| Mar–May | The clay swells and holds water. Root rot and Phytophthora show up now, and saturated ground brings whole trees over. |
| Jun–Aug | The clay shrinks and cracks, shearing feeder roots and drying the root zone from below. This is what most summer decline here actually is. |
| Sep–Oct | Best planting window. Dig wide, never deep, and never amend the backfill in this soil. |
| Nov–Dec | Removals and structural work while the ground is firm and the canopy light. |
Straight answers
Stump Grinding in Malone — straight answers
What does stump grinding cost in Malone?
Most Malone jobs run $95–$600. Access moves this more than tree size does.
Do you cover Malone?
Yes — Malone is in Hill County, inside our regular route, 63 miles from our Fort Worth base. Estimates are free and usually within a couple of business days.
When is the right time of year?
Late summer through winter for most work. On oaks it is not optional — nothing between February 1 and June 30, because of oak wilt.
Are you licensed and insured?
General liability and workers' compensation, certificate sent before you book. Texas does not license tree services, which is why that question matters more here than elsewhere.
FAQ
Stump Grinding in Malone — questions we get asked
Can I plant a new tree where the old stump was in Malone?
Not directly in the same hole. Even ground to twelve inches, the remaining root mass decays for years, robs nitrogen as it does, and leaves a void that settles. Plant three to four feet to the side, or grind deep and excavate the chip out and replace with topsoil if the location matters.
Do you remove the roots as well as the stump?
Grinding takes the stump and the surface roots radiating from it. It does not chase lateral roots across the yard — those decay in place over several years and are rarely a problem. If you are building over the spot, tell us and we will price full root-plate excavation instead.
Do you clean up afterwards?
Completely. Brush chipped and hauled, wood removed or stacked as you prefer, ground raked and blown off. We walk the site with you before we leave. Clean-up is included in the quoted price — it is not a line item that appears later.
Do I need to be home while you work?
No, as long as we have access and have already walked the job with you. Plenty of Malone customers are at work while we are there. We will call before we start and send photos when we finish.
How soon can you get to my property in Malone?
Estimates in Malone are usually within a couple of business days. Scheduled work typically runs one to two weeks out depending on season — spring and post-storm periods are busiest. Hazard situations get moved to the front of the queue.
Other tree services we provide in Malone
Commercial Tree Service in Malone
Property-wide tree work for HOAs, commercial sites, churches and municipalities.
Learn more →Brush Removal in Malone
Hauling off brush piles, storm debris and yard-waste stacks.
Learn more →Tree Cutting in Malone
Cutting down trees, cutting back limbs, and cutting up what has already fallen.
Learn more →Certified Arborist in Malone
A credentialed opinion on whether a tree is safe, sick, or fine as it is.
Learn more →Emergency Tree Service in Malone
Storm response for trees on houses, drives, fences and power drops.
Learn more →Tree Pruning in Malone
Structural and health pruning — the cuts that change how a tree grows.
Learn more →Stump Grinding near Malone
We cover the whole corridor, so a job in Malone is rarely a special trip.
See all cities in Hill County, or our full service area map. Looking for stump grinding across the whole region? See Stump Grinding & Stump Removal.
Standards and sources we work to
- Texas A&M Forest Service — Oak Wilt — The Feb 1 – Jun 30 oak pruning restriction and wound-painting guidance we follow.
- ANSI A300 (Part 1) — Pruning — The national standard our pruning cuts are made to, including the limits on live-canopy removal.
- International Society of Arboriculture — Certification body for arborists. Certifications carry a number the issuer will confirm.
- Tree Care Industry Association — Industry safety standards and accreditation.
- USDA Plant Hardiness Zone Map — North Central Texas sits in zones 8a–8b, which sets what will and will not establish here.
Prices are typical ranges for North Central Texas and are not a quote. Every job is quoted in writing after an on-site visit.
Need stump grinding in Malone?
Free written estimate, usually within a couple of business days. Licensed, insured, and we clean up completely.
Monday–Friday, 8:00 AM – 5:00 PM · Storm and hazard calls are answered outside office hours.