Stump Grinding & Stump Removal in Grapevine, Texas
Grinding stumps 6–12 inches below grade so the ground can be re-used. Serving Grapevine and the rest of Tarrant County since 2014 — free written estimates, fully insured crews, and complete clean-up.
Do you provide stump grinding in Grapevine, TX?
Tree Service Pros provides stump grinding in Grapevine, Texas. Grinding stumps 6–12 inches below grade so the ground can be re-used. Most Grapevine jobs fall between $95 and $600. Estimates are free and in writing, the crew is insured, and Grapevine is inside our regular Tarrant County service area — call (817) 508-9940.
A stump left in the ground is a trip hazard, a mower-killer and a termite and Ganoderma host. Grinding is far cheaper than excavating the root plate. With about 50,631 residents, Grapevine has the mix we see most: established neighbourhoods with mature canopy, newer subdivisions with young trees that were never structurally pruned, and not much room between them.
The sand belt drains fast and dries out hard, which is why established post oaks here fail from drought stress long before they fail from disease. That matters for grinding: in Grapevine the roots run wide and shallow rather than deep, so surface roots often need taking down along with the stump.
- Service
- Stump Grinding
- Area
- GrapevineTarrant County
- Typical range
- $95–$600per job, varies by site
- Estimates
- Freewritten, no obligation
What is included in Grapevine
- Ground 6–12 in. below grade for replanting or sod
- Surface-root grinding along walks and drives
- Chip backfill or full haul-off — your call
- Narrow-access machines for gated back yards
- Utility locate before every grind
At a glance
Stump Grinding in Grapevine — the short version
| Service area | Grapevine, Tarrant County, Texas |
|---|---|
| Population | 50,631 |
| Soil | sandy loam over clay (pH 6.0–7.0) |
| Common trees | post oak, blackjack oak, eastern red cedar, cedar elm |
| Most common problem | Post oak decline |
| ZIP codes | 76051, 76099 |
| Typical cost | $95–$600 |
| Oak pruning window | July – January |
Signs you need stump grinding in Grapevine
- A stump you keep catching the mower on
- Mushrooms fruiting on old stump wood near the house
- Surface roots lifting a walk or drive
- Wanting to replant, re-sod or build over the spot
- Termite activity in decaying stump wood
Any of these is worth a free look. We will tell you honestly if it can wait.
Grinding versus digging a stump out
Grinding uses a carbide wheel to chew the stump into mulch, typically six to twelve inches below grade — deep enough to plant grass over, and deep enough for most replanting if you cut a fresh hole beside it rather than in it. Excavating the whole root plate with a machine costs several times as much, wrecks the surrounding lawn, and is only necessary if you are pouring a foundation or a pool over the spot.
The by-product is a surprising amount of chip. A stump grinds into roughly twice the volume of the stump itself, mounded over the hole. You can leave it as backfill — it settles over a season — or we haul it and bring in topsoil. Decide before we start; it changes the price.
Always locate before grinding
Stump grinders cut below grade, and irrigation lines, low-voltage lighting, gas service and cable drops all live at exactly that depth. Every grind we do starts with an 811 locate for public utilities, and we ask you to flag private lines — sprinkler heads and landscape lighting are not on the locate.
How the job runs
Stump Grinding in Grapevine, step by step
Confirm depth and finish
Replanting, sod, or just level? That sets how deep we go.
Locate utilities
811 ticket for public lines; you flag sprinklers and lighting.
Protect the surrounds
Screens and mats — grinding throws chip and the occasional stone a long way.
Grind past the flare
Down to depth and out to the buttress roots, not just the visible stump.
Backfill or haul
Chip raked back in and topped off, or removed and replaced with topsoil ready for seed.
Pricing
What stump grinding costs in Grapevine
Most stump grinding work in Grapevine falls between $95 and $600 for a typical residential job. That is a real range, not a teaser — what puts a job at one end or the other is below.
What moves the price
- Stump diameter measured at the widest point of the flare, not the cut face
- Grinding depth — replanting depth costs more than level-with-grade
- Access; a walk-behind grinder through a narrow gate is slower
- Whether chip is backfilled or hauled off and replaced with soil
- Rock or embedded metal — old fence line stumps are frequently full of wire
The only way to get a real number is for someone to look at it. That visit is free — request an estimate or call (817) 508-9940. Full pricing detail for every service is in our North Texas tree service cost guide.
Local conditions
Grapevine soil, species and timing
The eastern cross timbers runs under Grapevine: sandy loam over clay subsoil. Mature canopy here is mostly post oak and blackjack oak, with cedar elm where there is more depth. The sand belt drains fast and dries out hard, which is why established post oaks here fail from drought stress long before they fail from disease.
We cover ZIP codes 76051 and 76099. Because we are already working nearby, scheduling in Grapevine is usually easy — Southlake (4 mi), Colleyville (5 mi), Euless (6 mi) and Bedford (6 mi) are all on the same route.
People in Grapevine search for this as stump removal service, tree stump removal, or simply stump removal in Grapevine — it is all the same job, and the estimate is free either way.
Timing
Tree care calendar for Grapevine
| When | What matters |
|---|---|
| Jan–Feb | Dormant-season pruning. Post oaks in particular should only be worked while fully dormant. |
| Feb 1–Jun 30 | No oak pruning. The sand belt carries a high post and blackjack oak population, so this window matters more here than most. |
| Mar–May | Wet spring on sandy loam over clay means saturated ground and root-plate failures. Leaning trees get assessed now, not later. |
| Jun–Aug | Sand drains fast and dries hard. Established post oaks fail from drought stress here long before they fail from disease. |
| Sep–Oct | Planting window. Avoid disturbing the root zone of any mature post oak — they do not forgive it. |
| Nov–Dec | Best time for removals and for spotting hypoxylon on stressed oaks once the canopy is off. |
Straight answers
Stump Grinding in Grapevine — straight answers
What does stump grinding cost in Grapevine?
Most Grapevine jobs run $95–$600. Access moves this more than tree size does.
Do you cover Grapevine?
Yes — Grapevine is in Tarrant County, inside our regular route, 19 miles from our Fort Worth base. Estimates are free and usually within a couple of business days.
When is the right time of year?
Late summer through winter for most work. On oaks it is not optional — nothing between February 1 and June 30, because of oak wilt.
Are you licensed and insured?
General liability and workers' compensation, certificate sent before you book. Texas does not license tree services, which is why that question matters more here than elsewhere.
FAQ
Stump Grinding in Grapevine — questions we get asked
Can I plant a new tree where the old stump was in Grapevine?
Not directly in the same hole. Even ground to twelve inches, the remaining root mass decays for years, robs nitrogen as it does, and leaves a void that settles. Plant three to four feet to the side, or grind deep and excavate the chip out and replace with topsoil if the location matters.
Do you remove the roots as well as the stump?
Grinding takes the stump and the surface roots radiating from it. It does not chase lateral roots across the yard — those decay in place over several years and are rarely a problem. If you are building over the spot, tell us and we will price full root-plate excavation instead.
Do you give free estimates in Grapevine?
Yes. Someone comes out, looks at the tree, and you get a written price with the scope spelled out — no charge and no obligation. We do not quote tree work over the phone from a description, because the things that change the price (access, what is underneath, how the wood has to come out) are not visible from a description.
How long does the work usually take in Grapevine?
Most residential jobs are a single day. A straightforward trim on one or two trees is a half day; a large removal that has to be rigged over a house can run two. We give you a realistic window in the written estimate rather than a hopeful one.
Do you clean up afterwards?
Completely. Brush chipped and hauled, wood removed or stacked as you prefer, ground raked and blown off. We walk the site with you before we leave. Clean-up is included in the quoted price — it is not a line item that appears later.
Can you work near power lines?
Up to a point. Anything in contact with a service drop or a primary conductor is the utility's to clear first — we do not cut energised lines and neither should anyone who is not a qualified line-clearance crew. We handle everything outside those clearances.
Can you work around my schedule?
Usually. Most residential work happens on weekdays during business hours, but we can often arrange early starts or a specific day if access, pets or gates require it. Commercial properties routinely get after-hours or weekend scheduling.
What if I only want an opinion, not work done?
That is fine and it is free. A fair share of what we look at does not need what it was quoted for. We would rather tell you that and be the people you call next time.
Other tree services we provide in Grapevine
Tree Surgeon in Grapevine
The climbing, cutting and rigging work — done by people with the credentials to back the name.
Learn more →Root Barriers in Grapevine
Redirecting roots away from foundations, drives and pools — without killing the tree.
Learn more →Tree Removal in Grapevine
Safe, insured removal of dead, dying, damaged or badly-placed trees.
Learn more →Tree Pruning in Grapevine
Structural and health pruning — the cuts that change how a tree grows.
Learn more →Certified Arborist in Grapevine
A credentialed opinion on whether a tree is safe, sick, or fine as it is.
Learn more →Brush Removal in Grapevine
Hauling off brush piles, storm debris and yard-waste stacks.
Learn more →Stump Grinding near Grapevine
We cover the whole corridor, so a job in Grapevine is rarely a special trip.
See all cities in Tarrant County, or our full service area map. Looking for stump grinding across the whole region? See Stump Grinding & Stump Removal.
Standards and sources we work to
- Texas A&M Forest Service — Oak Wilt — The Feb 1 – Jun 30 oak pruning restriction and wound-painting guidance we follow.
- ANSI A300 (Part 1) — Pruning — The national standard our pruning cuts are made to, including the limits on live-canopy removal.
- International Society of Arboriculture — Certification body for arborists. Certifications carry a number the issuer will confirm.
- Tree Care Industry Association — Industry safety standards and accreditation.
- USDA Plant Hardiness Zone Map — North Central Texas sits in zones 8a–8b, which sets what will and will not establish here.
Prices are typical ranges for North Central Texas and are not a quote. Every job is quoted in writing after an on-site visit.
Need stump grinding in Grapevine?
Free written estimate, usually within a couple of business days. Licensed, insured, and we clean up completely.
Monday–Friday, 8:00 AM – 5:00 PM · Storm and hazard calls are answered outside office hours.