Stump Grinding & Stump Removal in Hurst, Texas
Grinding stumps 6–12 inches below grade so the ground can be re-used. Serving Hurst and the rest of Tarrant County since 2014 — free written estimates, fully insured crews, and complete clean-up.
Do you provide stump grinding in Hurst, TX?
Yes — we do stump grinding throughout Hurst, TX. Grinding stumps 6–12 inches below grade so the ground can be re-used. Most Hurst jobs fall between $95 and $600. We are a licensed, insured Tarrant County tree service with a Certified Arborist on staff, and estimates cost nothing.
With about 40,413 residents, Hurst has the mix we see most: established neighbourhoods with mature canopy, newer subdivisions with young trees that were never structurally pruned, and not much room between them. A stump left in the ground is a trip hazard, a mower-killer and a termite and Ganoderma host. Grinding is far cheaper than excavating the root plate.
Root plates here are wide and shallow because there is nowhere to go down — limestone is often less than two feet under the grass. That matters for grinding: in Hurst the roots run wide and shallow rather than deep, so surface roots often need taking down along with the stump.
- Service
- Stump Grinding
- Area
- HurstTarrant County
- Typical range
- $95–$600per job, varies by site
- Estimates
- Freewritten, no obligation
What is included in Hurst
- Ground 6–12 in. below grade for replanting or sod
- Surface-root grinding along walks and drives
- Chip backfill or full haul-off — your call
- Narrow-access machines for gated back yards
- Utility locate before every grind
At a glance
Stump Grinding in Hurst — the short version
| Service area | Hurst, Tarrant County, Texas |
|---|---|
| Population | 40,413 |
| Soil | shallow alkaline clay over limestone (pH 7.8–8.3) |
| Common trees | live oak, cedar elm, Texas ash, Shumard oak |
| Most common problem | Iron chlorosis |
| ZIP codes | 76053, 76054, 77359, 77362 |
| Typical cost | $95–$600 |
| Oak pruning window | July – January |
Signs you need stump grinding in Hurst
- A stump you keep catching the mower on
- Mushrooms fruiting on old stump wood near the house
- Surface roots lifting a walk or drive
- Wanting to replant, re-sod or build over the spot
- Termite activity in decaying stump wood
Any of these is worth a free look. We will tell you honestly if it can wait.
Grinding versus digging a stump out
Grinding uses a carbide wheel to chew the stump into mulch, typically six to twelve inches below grade — deep enough to plant grass over, and deep enough for most replanting if you cut a fresh hole beside it rather than in it. Excavating the whole root plate with a machine costs several times as much, wrecks the surrounding lawn, and is only necessary if you are pouring a foundation or a pool over the spot.
The by-product is a surprising amount of chip. A stump grinds into roughly twice the volume of the stump itself, mounded over the hole. You can leave it as backfill — it settles over a season — or we haul it and bring in topsoil. Decide before we start; it changes the price.
Always locate before grinding
Stump grinders cut below grade, and irrigation lines, low-voltage lighting, gas service and cable drops all live at exactly that depth. Every grind we do starts with an 811 locate for public utilities, and we ask you to flag private lines — sprinkler heads and landscape lighting are not on the locate.
How the job runs
Stump Grinding in Hurst, step by step
Confirm depth and finish
Replanting, sod, or just level? That sets how deep we go.
Locate utilities
811 ticket for public lines; you flag sprinklers and lighting.
Protect the surrounds
Screens and mats — grinding throws chip and the occasional stone a long way.
Grind past the flare
Down to depth and out to the buttress roots, not just the visible stump.
Backfill or haul
Chip raked back in and topped off, or removed and replaced with topsoil ready for seed.
Pricing
What stump grinding costs in Hurst
Most stump grinding work in Hurst falls between $95 and $600 for a typical residential job. That is a real range, not a teaser — what puts a job at one end or the other is below.
What moves the price
- Stump diameter measured at the widest point of the flare, not the cut face
- Grinding depth — replanting depth costs more than level-with-grade
- Access; a walk-behind grinder through a narrow gate is slower
- Whether chip is backfilled or hauled off and replaced with soil
- Rock or embedded metal — old fence line stumps are frequently full of wire
The only way to get a real number is for someone to look at it. That visit is free — request an estimate or call (817) 508-9940. Full pricing detail for every service is in our North Texas tree service cost guide.
Local conditions
Hurst soil, species and timing
Tree work in Hurst is shaped by the soil more than anything else. Root plates here are wide and shallow because there is nowhere to go down — limestone is often less than two feet under the grass. The species that handle it — live oak, cedar elm, Texas ash — are the ones you see on every mature street, and iron chlorosis is their recurring problem.
We cover ZIP codes 76053, 76054, 77359 and 77362. Hurst sits inside a tight cluster of towns we run every week: North Richland Hills (2 mi), Colleyville (3 mi), Bedford (3 mi) and Watauga (4 mi) are all on the same route.
People in Hurst search for this as stump grinding service, tree stump removal, or simply stump grinder in Hurst — it is all the same job, and the estimate is free either way.
Timing
Tree care calendar for Hurst
| When | What matters |
|---|---|
| Jan–Feb | Best window of the year for structural pruning. Trees are dormant, the framework is visible with the leaves off, and crews are less booked. |
| Feb 1–Jun 30 | Do not prune oaks. Paint any unavoidable wound immediately — storm damage included. |
| Mar–May | Storm season. Straight-line winds find weak unions first. Deadwood and over-extended limbs are worth clearing before it starts. |
| Jun–Aug | Heat and drought stress. Water deeply and infrequently; the thin soil over limestone here dries from the bottom up. Watch for iron chlorosis. |
| Sep–Oct | Root growth restarts as soil cools — the best planting window and a good time for soil correction. |
| Nov–Dec | Leaves down, structure visible. Removals are cheapest now: lighter canopy, firmer ground, less rigging. |
Straight answers
Stump Grinding in Hurst — straight answers
What does stump grinding cost in Hurst?
Most Hurst jobs run $95–$600. Access moves this more than tree size does.
Do you cover Hurst?
Yes — Hurst is in Tarrant County, inside our regular route, 11 miles from our Fort Worth base. Estimates are free and usually within a couple of business days.
When is the right time of year?
Late summer through winter for most work. On oaks it is not optional — nothing between February 1 and June 30, because of oak wilt.
Are you licensed and insured?
General liability and workers' compensation, certificate sent before you book. Texas does not license tree services, which is why that question matters more here than elsewhere.
FAQ
Stump Grinding in Hurst — questions we get asked
Can I plant a new tree where the old stump was in Hurst?
Not directly in the same hole. Even ground to twelve inches, the remaining root mass decays for years, robs nitrogen as it does, and leaves a void that settles. Plant three to four feet to the side, or grind deep and excavate the chip out and replace with topsoil if the location matters.
Do you remove the roots as well as the stump?
Grinding takes the stump and the surface roots radiating from it. It does not chase lateral roots across the yard — those decay in place over several years and are rarely a problem. If you are building over the spot, tell us and we will price full root-plate excavation instead.
Do you charge extra for difficult access?
It is priced into the quote rather than added afterwards. Access is the single biggest cost driver in this trade, which is why we look at every job in person instead of quoting from a description.
Are you licensed and insured to work in Hurst?
We carry general liability and workers' compensation, and we will send the certificate before you book — not after. Texas does not license tree services at state level, which is exactly why the insurance question matters: if an uninsured crew damages your property or injures someone on it, that lands on your homeowner's policy.
Will you damage my lawn or sprinkler system?
We plate or mat soft ground before anything heavy crosses it, and we ask you to flag sprinkler heads and low-voltage lighting, which do not show up on a utility locate. Some rutting is possible on saturated ground — if it happens, repairing it is on us.
Do you serve areas outside Hurst?
Yes — our regular territory covers Tarrant, Johnson, Parker, Hill and Bosque Counties and the cities inside them. Hurst is on our normal route.
Can you work near power lines?
Up to a point. Anything in contact with a service drop or a primary conductor is the utility's to clear first — we do not cut energised lines and neither should anyone who is not a qualified line-clearance crew. We handle everything outside those clearances.
Do you give free estimates in Hurst?
Yes. Someone comes out, looks at the tree, and you get a written price with the scope spelled out — no charge and no obligation. We do not quote tree work over the phone from a description, because the things that change the price (access, what is underneath, how the wood has to come out) are not visible from a description.
Other tree services we provide in Hurst
Emergency Tree Service in Hurst
Storm response for trees on houses, drives, fences and power drops.
Learn more →Tree Pruning in Hurst
Structural and health pruning — the cuts that change how a tree grows.
Learn more →Land Clearing in Hurst
Clearing brush, scrub and trees off building pads, pasture and fence lines.
Learn more →Tree Removal in Hurst
Safe, insured removal of dead, dying, damaged or badly-placed trees.
Learn more →Tree Trimming in Hurst
Crown cleaning, raising, thinning and deadwood removal on an ANSI A300 standard.
Learn more →Root Barriers in Hurst
Redirecting roots away from foundations, drives and pools — without killing the tree.
Learn more →Stump Grinding near Hurst
We cover the whole corridor, so a job in Hurst is rarely a special trip.
See all cities in Tarrant County, or our full service area map. Looking for stump grinding across the whole region? See Stump Grinding & Stump Removal.
Standards and sources we work to
- Texas A&M Forest Service — Oak Wilt — The Feb 1 – Jun 30 oak pruning restriction and wound-painting guidance we follow.
- ANSI A300 (Part 1) — Pruning — The national standard our pruning cuts are made to, including the limits on live-canopy removal.
- International Society of Arboriculture — Certification body for arborists. Certifications carry a number the issuer will confirm.
- Tree Care Industry Association — Industry safety standards and accreditation.
- USDA Plant Hardiness Zone Map — North Central Texas sits in zones 8a–8b, which sets what will and will not establish here.
Prices are typical ranges for North Central Texas and are not a quote. Every job is quoted in writing after an on-site visit.
Need stump grinding in Hurst?
Free written estimate, usually within a couple of business days. Licensed, insured, and we clean up completely.
Monday–Friday, 8:00 AM – 5:00 PM · Storm and hazard calls are answered outside office hours.