Stump Grinding & Stump Removal in Arlington, Texas
Grinding stumps 6–12 inches below grade so the ground can be re-used. Serving Arlington and the rest of Tarrant County since 2014 — free written estimates, fully insured crews, and complete clean-up.
Do you provide stump grinding in Arlington, TX?
Tree Service Pros provides stump grinding in Arlington, Texas. Grinding stumps 6–12 inches below grade so the ground can be re-used. Most Arlington jobs fall between $95 and $600. Estimates are free and in writing, the crew is insured, and Arlington is inside our regular Tarrant County service area — call (817) 508-9940.
A stump left in the ground is a trip hazard, a mower-killer and a termite and Ganoderma host. Grinding is far cheaper than excavating the root plate. Arlington is one of the largest cities in Tarrant County, with roughly 394,266 residents and tree stock old enough that a lot of it now needs real work rather than a tidy-up.
The sand belt drains fast and dries out hard, which is why established post oaks here fail from drought stress long before they fail from disease. That matters for grinding: in Arlington the roots run wide and shallow rather than deep, so surface roots often need taking down along with the stump.
- Service
- Stump Grinding
- Area
- ArlingtonTarrant County
- Typical range
- $95–$600per job, varies by site
- Estimates
- Freewritten, no obligation
What is included in Arlington
- Ground 6–12 in. below grade for replanting or sod
- Surface-root grinding along walks and drives
- Chip backfill or full haul-off — your call
- Narrow-access machines for gated back yards
- Utility locate before every grind
At a glance
Stump Grinding in Arlington — the short version
| Service area | Arlington, Tarrant County, Texas |
|---|---|
| Population | 394,266 |
| Soil | sandy loam over clay (pH 6.0–7.0) |
| Common trees | post oak, blackjack oak, eastern red cedar, cedar elm |
| Most common problem | Post oak decline |
| ZIP codes | 76000, 76001, 76002, 76003, 76004, 76005 |
| Typical cost | $95–$600 |
| Oak pruning window | July – January |
Signs you need stump grinding in Arlington
- A stump you keep catching the mower on
- Mushrooms fruiting on old stump wood near the house
- Surface roots lifting a walk or drive
- Wanting to replant, re-sod or build over the spot
- Termite activity in decaying stump wood
Any of these is worth a free look. We will tell you honestly if it can wait.
Grinding versus digging a stump out
Grinding uses a carbide wheel to chew the stump into mulch, typically six to twelve inches below grade — deep enough to plant grass over, and deep enough for most replanting if you cut a fresh hole beside it rather than in it. Excavating the whole root plate with a machine costs several times as much, wrecks the surrounding lawn, and is only necessary if you are pouring a foundation or a pool over the spot.
The by-product is a surprising amount of chip. A stump grinds into roughly twice the volume of the stump itself, mounded over the hole. You can leave it as backfill — it settles over a season — or we haul it and bring in topsoil. Decide before we start; it changes the price.
Always locate before grinding
Stump grinders cut below grade, and irrigation lines, low-voltage lighting, gas service and cable drops all live at exactly that depth. Every grind we do starts with an 811 locate for public utilities, and we ask you to flag private lines — sprinkler heads and landscape lighting are not on the locate.
How the job runs
Stump Grinding in Arlington, step by step
Confirm depth and finish
Replanting, sod, or just level? That sets how deep we go.
Locate utilities
811 ticket for public lines; you flag sprinklers and lighting.
Protect the surrounds
Screens and mats — grinding throws chip and the occasional stone a long way.
Grind past the flare
Down to depth and out to the buttress roots, not just the visible stump.
Backfill or haul
Chip raked back in and topped off, or removed and replaced with topsoil ready for seed.
Pricing
What stump grinding costs in Arlington
Most stump grinding work in Arlington falls between $95 and $600 for a typical residential job. That is a real range, not a teaser — what puts a job at one end or the other is below.
What moves the price
- Stump diameter measured at the widest point of the flare, not the cut face
- Grinding depth — replanting depth costs more than level-with-grade
- Access; a walk-behind grinder through a narrow gate is slower
- Whether chip is backfilled or hauled off and replaced with soil
- Rock or embedded metal — old fence line stumps are frequently full of wire
The only way to get a real number is for someone to look at it. That visit is free — request an estimate or call (817) 508-9940. Full pricing detail for every service is in our North Texas tree service cost guide.
Local conditions
Arlington soil, species and timing
Arlington sits on sandy loam over clay subsoil — Eastern Cross Timbers ground. That drives what grows well here (post oak, blackjack oak and eastern red cedar dominate the older streets) and what goes wrong: post oak decline is the condition we are called out for most.
We cover ZIP codes 76000, 76001, 76002, 76003, 76004, 76005, 76006, 76007, 76010, 76011, 76012, 76013, 76014, 76015, 76016, 76017, 76018, 76019, 76094 and 76096. Because we are already working nearby, scheduling in Arlington is usually easy — Pantego (2 mi), Dalworthington Gardens (2 mi), Kennedale (8 mi) and Forest Hill (8 mi) are all on the same route.
People in Arlington search for this as stump grinder, stump removal, or simply tree stump removal in Arlington — it is all the same job, and the estimate is free either way.
Timing
Tree care calendar for Arlington
| When | What matters |
|---|---|
| Jan–Feb | Dormant-season pruning. Post oaks in particular should only be worked while fully dormant. |
| Feb 1–Jun 30 | No oak pruning. The sand belt carries a high post and blackjack oak population, so this window matters more here than most. |
| Mar–May | Wet spring on sandy loam over clay means saturated ground and root-plate failures. Leaning trees get assessed now, not later. |
| Jun–Aug | Sand drains fast and dries hard. Established post oaks fail from drought stress here long before they fail from disease. |
| Sep–Oct | Planting window. Avoid disturbing the root zone of any mature post oak — they do not forgive it. |
| Nov–Dec | Best time for removals and for spotting hypoxylon on stressed oaks once the canopy is off. |
Straight answers
Stump Grinding in Arlington — straight answers
What does stump grinding cost in Arlington?
Most Arlington jobs run $95–$600. Access moves this more than tree size does.
Do you cover Arlington?
Yes — Arlington is in Tarrant County, inside our regular route, 13 miles from our Fort Worth base. Estimates are free and usually within a couple of business days.
When is the right time of year?
Late summer through winter for most work. On oaks it is not optional — nothing between February 1 and June 30, because of oak wilt.
Are you licensed and insured?
General liability and workers' compensation, certificate sent before you book. Texas does not license tree services, which is why that question matters more here than elsewhere.
FAQ
Stump Grinding in Arlington — questions we get asked
Can I plant a new tree where the old stump was in Arlington?
Not directly in the same hole. Even ground to twelve inches, the remaining root mass decays for years, robs nitrogen as it does, and leaves a void that settles. Plant three to four feet to the side, or grind deep and excavate the chip out and replace with topsoil if the location matters.
Do you remove the roots as well as the stump?
Grinding takes the stump and the surface roots radiating from it. It does not chase lateral roots across the yard — those decay in place over several years and are rarely a problem. If you are building over the spot, tell us and we will price full root-plate excavation instead.
Do you clean up afterwards?
Completely. Brush chipped and hauled, wood removed or stacked as you prefer, ground raked and blown off. We walk the site with you before we leave. Clean-up is included in the quoted price — it is not a line item that appears later.
Do you charge extra for difficult access?
It is priced into the quote rather than added afterwards. Access is the single biggest cost driver in this trade, which is why we look at every job in person instead of quoting from a description.
What happens if it rains on my scheduled day?
We reschedule. Saturated ground means ruts and, more importantly, compromised anchor points and footing — nobody should be aloft in a tree in a North Texas thunderstorm. You get a call, not a no-show.
How soon can you get to my property in Arlington?
Estimates in Arlington are usually within a couple of business days. Scheduled work typically runs one to two weeks out depending on season — spring and post-storm periods are busiest. Hazard situations get moved to the front of the queue.
Can you work near power lines?
Up to a point. Anything in contact with a service drop or a primary conductor is the utility's to clear first — we do not cut energised lines and neither should anyone who is not a qualified line-clearance crew. We handle everything outside those clearances.
Do you offer discounts for multiple trees?
Effectively yes — the second tree on the same visit costs less than it would on its own because setup, travel and haul-off are already covered. If you have several trees needing attention, get them all quoted at once rather than one at a time.
Other tree services we provide in Arlington
Tree Pruning in Arlington
Structural and health pruning — the cuts that change how a tree grows.
Learn more →Tree Cutting in Arlington
Cutting down trees, cutting back limbs, and cutting up what has already fallen.
Learn more →Tree Disease Treatment in Arlington
Diagnosis and treatment for the diseases that actually kill North Texas trees.
Learn more →Root Barriers in Arlington
Redirecting roots away from foundations, drives and pools — without killing the tree.
Learn more →Land Clearing in Arlington
Clearing brush, scrub and trees off building pads, pasture and fence lines.
Learn more →Certified Arborist in Arlington
A credentialed opinion on whether a tree is safe, sick, or fine as it is.
Learn more →Stump Grinding near Arlington
We cover the whole corridor, so a job in Arlington is rarely a special trip.
See all cities in Tarrant County, or our full service area map. Looking for stump grinding across the whole region? See Stump Grinding & Stump Removal.
Standards and sources we work to
- Texas A&M Forest Service — Oak Wilt — The Feb 1 – Jun 30 oak pruning restriction and wound-painting guidance we follow.
- ANSI A300 (Part 1) — Pruning — The national standard our pruning cuts are made to, including the limits on live-canopy removal.
- International Society of Arboriculture — Certification body for arborists. Certifications carry a number the issuer will confirm.
- Tree Care Industry Association — Industry safety standards and accreditation.
- USDA Plant Hardiness Zone Map — North Central Texas sits in zones 8a–8b, which sets what will and will not establish here.
Prices are typical ranges for North Central Texas and are not a quote. Every job is quoted in writing after an on-site visit.
Need stump grinding in Arlington?
Free written estimate, usually within a couple of business days. Licensed, insured, and we clean up completely.
Monday–Friday, 8:00 AM – 5:00 PM · Storm and hazard calls are answered outside office hours.