Shrub & Hedge Trimming in Hurst, Texas
Shaping, thinning and renewing the shrubs and hedges around the house. Serving Hurst and the rest of Tarrant County since 2014 — free written estimates, fully insured crews, and complete clean-up.
Do you provide shrub and hedge trimming in Hurst, TX?
Shrub & Hedge Trimming in Hurst, Texas. Shaping, thinning and renewing the shrubs and hedges around the house. Most Hurst jobs fall between $150 and $850. Tree Service Pros has worked Tarrant County since 2014. Free written estimate, full clean-up included, and no work starts without your sign-off.
We have been doing shrub & hedge trimming work in and around Hurst since 2014. Foundation shrubs live in the hardest microclimate on a property — reflected heat off brick, compacted builder's fill, and irrigation zoned for turf rather than woody plants. Most of what looks like disease is really shearing and water.
The fort worth prairie runs under Hurst: thin, rocky alkaline clay over limestone bedrock. Mature canopy here is mostly live oak and cedar elm, with Shumard oak where there is more depth. Root plates here are wide and shallow because there is nowhere to go down — limestone is often less than two feet under the grass.
- Service
- Shrub & Hedge Trimming
- Area
- HurstTarrant County
- Typical range
- $150–$850per job, varies by site
- Estimates
- Freewritten, no obligation
What is included in Hurst
- Formal hedge shaping and screen maintenance
- Renewal pruning on overgrown foundation shrubs
- Thinning for air movement and light
- Bloom-safe timing so you do not cut off next season's flowers
- Full clean-up and haul-off
At a glance
Shrub & Hedge Trimming in Hurst — the short version
| Service area | Hurst, Tarrant County, Texas |
|---|---|
| Population | 40,413 |
| Soil | shallow alkaline clay over limestone (pH 7.8–8.3) |
| Common trees | live oak, cedar elm, Texas ash, Shumard oak |
| Most common problem | Iron chlorosis |
| ZIP codes | 76053, 76054, 77359, 77362 |
| Typical cost | $150–$850 |
| Oak pruning window | July – January |
Signs you need shrub and hedge trimming in Hurst
- A hedge that has gone bare and woody at the bottom
- Shrubs grown up over windows or blocking a walk
- Foundation plants pressing against brick or siding
- Bare, dead interior under a green shell
- Shrubs that stopped flowering after being sheared
Any of these is worth a free look. We will tell you honestly if it can wait.
Shearing is not pruning, and it is why hedges go hollow
Running a hedge trimmer over the outside of a shrub every few months feels like maintenance, but it creates a dense shell of growth that shades out everything inside. The interior thins, then dies, and eventually you have a green box with nothing but bare sticks under the surface. Cut it back at that point and there is no live growth left to respond.
The fix is thinning alongside shaping — reaching inside and removing whole stems at the base so light and air reach the interior. On badly overgrown shrubs, renewal pruning takes about a third of the oldest stems to the ground each year for three years, rebuilding the plant without ever leaving it looking butchered.
Timing decides whether you get flowers
Spring bloomers — azalea, forsythia, quince, spirea, climbing roses — set next year's buds soon after they finish flowering. Shear them in autumn or winter and you are cutting off the entire display. Prune those right after they bloom. Summer bloomers like crape myrtle and althea flower on new growth and are pruned in late winter. And crape myrtles do not need topping — that is the same mistake as topping a tree, just smaller.
How the job runs
Shrub & Hedge Trimming in Hurst, step by step
Identify what you actually have
Bloom timing decides the schedule, and half the shrubs we are asked to cut are on the wrong one.
Thin before you shape
Whole stems out at the base first, so light reaches the interior and the plant stays green inside.
Shape to a taper
Wider at the bottom than the top. A hedge cut straight-sided or wider at the top shades its own base and goes bare at the bottom.
Respect the limits
No more than about a third of the plant in one season, and never into bare wood on conifers — junipers do not regrow from brown.
Clean up completely
Clippings hauled, beds blown, and the plants left looking deliberate rather than shorn.
Pricing
What shrub and hedge trimming costs in Hurst
Most shrub & hedge trimming work in Hurst falls between $150 and $850 for a typical residential job. That is a real range, not a teaser — what puts a job at one end or the other is below.
What moves the price
- Number of shrubs and total linear feet of hedge
- How overgrown they are — renewal work takes far longer than upkeep
- Height, and whether ladders or a lift are needed
- Whether clippings are hauled or left
- Access, especially in fenced back yards
The only way to get a real number is for someone to look at it. That visit is free — request an estimate or call (817) 508-9940. Full pricing detail for every service is in our North Texas tree service cost guide.
Local conditions
Hurst soil, species and timing
The fort worth prairie runs under Hurst: thin, rocky alkaline clay over limestone bedrock. Mature canopy here is mostly live oak and cedar elm, with Shumard oak where there is more depth. Root plates here are wide and shallow because there is nowhere to go down — limestone is often less than two feet under the grass.
We cover ZIP codes 76053, 76054, 77359 and 77362. We are regularly within a few minutes of Hurst: North Richland Hills (2 mi), Colleyville (3 mi), Bedford (3 mi) and Watauga (4 mi) are all on the same route.
People in Hurst search for this as shrub pruning, hedge trimming near me, or simply bush trimming service in Hurst — it is all the same job, and the estimate is free either way.
Timing
Tree care calendar for Hurst
| When | What matters |
|---|---|
| Jan–Feb | Best window of the year for structural pruning. Trees are dormant, the framework is visible with the leaves off, and crews are less booked. |
| Feb 1–Jun 30 | Do not prune oaks. Paint any unavoidable wound immediately — storm damage included. |
| Mar–May | Storm season. Straight-line winds find weak unions first. Deadwood and over-extended limbs are worth clearing before it starts. |
| Jun–Aug | Heat and drought stress. Water deeply and infrequently; the thin soil over limestone here dries from the bottom up. Watch for iron chlorosis. |
| Sep–Oct | Root growth restarts as soil cools — the best planting window and a good time for soil correction. |
| Nov–Dec | Leaves down, structure visible. Removals are cheapest now: lighter canopy, firmer ground, less rigging. |
Straight answers
Shrub & Hedge Trimming in Hurst — straight answers
What does shrub and hedge trimming cost in Hurst?
Most Hurst jobs run $150–$850. Access moves this more than tree size does.
Do you cover Hurst?
Yes — Hurst is in Tarrant County, inside our regular route, 11 miles from our Fort Worth base. Estimates are free and usually within a couple of business days.
When is the right time of year?
Late summer through winter for most work. On oaks it is not optional — nothing between February 1 and June 30, because of oak wilt.
Are you licensed and insured?
General liability and workers' compensation, certificate sent before you book. Texas does not license tree services, which is why that question matters more here than elsewhere.
FAQ
Shrub & Hedge Trimming in Hurst — questions we get asked
When should I trim shrubs in Hurst?
It depends on when they bloom. Spring-flowering shrubs (azalea, forsythia, quince, spirea) are pruned right after they finish, because they set next year's buds soon after. Summer bloomers (crape myrtle, althea, roses) are pruned in late winter. Evergreen hedges can be shaped through the growing season, but avoid heavy cutting in the heat of a Hurst August.
Can an overgrown hedge be saved?
Usually, yes — with renewal pruning rather than one hard cut. We take about a third of the oldest stems to the ground each year for three years, which rebuilds the plant from the inside without ever leaving a bare box. The exception is junipers and most conifers: they do not regrow from bare wood, so once they are hollow, replacing is the honest answer.
Can you work around my schedule?
Usually. Most residential work happens on weekdays during business hours, but we can often arrange early starts or a specific day if access, pets or gates require it. Commercial properties routinely get after-hours or weekend scheduling.
Do you give free estimates in Hurst?
Yes. Someone comes out, looks at the tree, and you get a written price with the scope spelled out — no charge and no obligation. We do not quote tree work over the phone from a description, because the things that change the price (access, what is underneath, how the wood has to come out) are not visible from a description.
Do I need to be home while you work?
No, as long as we have access and have already walked the job with you. Plenty of Hurst customers are at work while we are there. We will call before we start and send photos when we finish.
Will you damage my lawn or sprinkler system?
We plate or mat soft ground before anything heavy crosses it, and we ask you to flag sprinkler heads and low-voltage lighting, which do not show up on a utility locate. Some rutting is possible on saturated ground — if it happens, repairing it is on us.
What if I only want an opinion, not work done?
That is fine and it is free. A fair share of what we look at does not need what it was quoted for. We would rather tell you that and be the people you call next time.
How long does the work usually take in Hurst?
Most residential jobs are a single day. A straightforward trim on one or two trees is a half day; a large removal that has to be rigged over a house can run two. We give you a realistic window in the written estimate rather than a hopeful one.
Other tree services we provide in Hurst
Tree Cutting in Hurst
Cutting down trees, cutting back limbs, and cutting up what has already fallen.
Learn more →Emergency Tree Service in Hurst
Storm response for trees on houses, drives, fences and power drops.
Learn more →Land Clearing in Hurst
Clearing brush, scrub and trees off building pads, pasture and fence lines.
Learn more →Tree Removal in Hurst
Safe, insured removal of dead, dying, damaged or badly-placed trees.
Learn more →Root Barriers in Hurst
Redirecting roots away from foundations, drives and pools — without killing the tree.
Learn more →Tree Disease Treatment in Hurst
Diagnosis and treatment for the diseases that actually kill North Texas trees.
Learn more →Shrub & Hedge Trimming near Hurst
We cover the whole corridor, so a job in Hurst is rarely a special trip.
See all cities in Tarrant County, or our full service area map. Looking for shrub & hedge trimming across the whole region? See Shrub & Hedge Trimming.
Standards and sources we work to
- Texas A&M Forest Service — Oak Wilt — The Feb 1 – Jun 30 oak pruning restriction and wound-painting guidance we follow.
- ANSI A300 (Part 1) — Pruning — The national standard our pruning cuts are made to, including the limits on live-canopy removal.
- International Society of Arboriculture — Certification body for arborists. Certifications carry a number the issuer will confirm.
- Tree Care Industry Association — Industry safety standards and accreditation.
- USDA Plant Hardiness Zone Map — North Central Texas sits in zones 8a–8b, which sets what will and will not establish here.
Prices are typical ranges for North Central Texas and are not a quote. Every job is quoted in writing after an on-site visit.
Need shrub and hedge trimming in Hurst?
Free written estimate, usually within a couple of business days. Licensed, insured, and we clean up completely.
Monday–Friday, 8:00 AM – 5:00 PM · Storm and hazard calls are answered outside office hours.