Licensed & insured Certified Arborist on staff Serving DFW since 2014

Land Clearing & Lot Clearing in Benbrook, Texas

Clearing brush, scrub and trees off building pads, pasture and fence lines. Serving Benbrook and the rest of Tarrant County since 2014 — free written estimates, fully insured crews, and complete clean-up.

Call (817) 508-9940 Get a free estimate

Do you provide land clearing in Benbrook, TX?

Tree Service Pros provides land clearing in Benbrook, Texas. Clearing brush, scrub and trees off building pads, pasture and fence lines. Most jobs run $1,500–$6,000 per acre. Estimates are free and in writing, the crew is insured, and Benbrook is inside our regular Tarrant County service area — call (817) 508-9940.

Clearing is measured in acres and access, not in trees. What it costs comes down to stem density, terrain, how much has to leave the property, and whether you want the root mat out or just the top growth off. Benbrook runs to about 24,520 people, close enough to Fort Worth (11 miles) to be on our regular route rather than a special trip.

Clearing near Benbrook means dealing with eastern red cedar and blackjack oak on sandy loam over sandstone. Stem density and how wet the ground stays decide the price far more than the acreage figure does.

Service
Land Clearing
Area
BenbrookTarrant County
Typical range
$1,500–$6,000per acre
Estimates
Freewritten, no obligation

What is included in Benbrook

  • Building pad and homesite clearing
  • Pasture reclamation and cedar removal
  • Fence-line and right-of-way clearing
  • Underbrush mulching and forestry mowing
  • Selective clearing that keeps the trees worth keeping

At a glance

Land Clearing in Benbrook — the short version

Key facts for land clearing in Benbrook, Texas.
Service areaBenbrook, Tarrant County, Texas
Population24,520
Soilsandy loam over sandstone (pH 5.8–7.2)
Common treespost oak, blackjack oak, cedar elm, pecan
Most common problemOak wilt
Typical cost$1,500–$6,000 per acre
Oak pruning windowJuly – January

Signs you need land clearing in Benbrook

  • Cedar closing in on pasture you want back
  • A building pad that needs opening up
  • A fence line you can no longer walk
  • Understory too thick to see or manage the good trees
  • New acreage you have not yet been able to assess

Any of these is worth a free look. We will tell you honestly if it can wait.

What land clearing costs comes down to

Clearing is priced by acre, but the acre is the least useful number. What actually drives the cost is stem density (scattered mesquite versus solid cedar), terrain and slope, how much material has to leave the property rather than be mulched in place, and whether you need the root mat out or just the top growth off.

Mulching in place with a forestry cutter is by a wide margin the cheapest finish and leaves a mulch layer that suppresses regrowth and holds soil. Grubbing roots out and hauling everything off costs several times more, and is only worth it when something is going to be built on the ground.

Do not clear-cut what you will want back

The most common regret we hear is clearing a lot flat and then paying to replant shade fifteen years later. Selective clearing — taking the scrub and the junk stems, keeping the specimen trees and the ones shading the future homesite — costs a little more per acre and is worth far more. We will walk it with you and flag what is worth keeping before anything starts.

How the job runs

Land Clearing in Benbrook, step by step

  1. Walk and mark the boundary

    Property pins, easements and keep trees flagged before any machine moves.

  2. Agree the finish

    Mulched in place, chipped and hauled, or grubbed to bare dirt — three very different prices.

  3. Clear in phases

    Underbrush first so we can see the stems worth keeping, then the selected removals.

  4. Handle the material

    Mulch spread, burned where legal and permitted, or loaded and hauled to a licensed site.

  5. Final grade and walk

    Ground left workable, stumps handled to the agreed depth, and a walk-through before the equipment leaves.

Pricing

What land clearing costs in Benbrook

Most land clearing work in Benbrook falls between $1,500 and $6,000 per acre. That is a real range, not a teaser — what puts a job at one end or the other is below.

What moves the price

  • Acreage, and how much of it is genuinely wooded
  • Stem density and average diameter — dense cedar is the expensive case
  • Terrain, slope and how wet the ground stays
  • Whether material is mulched in place or hauled off
  • Stump handling: leave, grind, or grub out entirely

The only way to get a real number is for someone to look at it. That visit is free — request an estimate or call (817) 508-9940. Full pricing detail for every service is in our North Texas tree service cost guide.

Local conditions

Benbrook soil, species and timing

Benbrook sits on sandy loam over sandstone — Western Cross Timbers ground. That drives what grows well here (post oak, blackjack oak and cedar elm dominate the older streets) and what goes wrong: oak wilt is the condition we are called out for most.

Because we are already working nearby, scheduling in Benbrook is usually easy — White Settlement (6 mi), Westover Hills (7 mi), Westworth Village (8 mi) and Aledo (8 mi) are all on the same route.

People in Benbrook search for this as acreage clearing, brush clearing, or simply lot clearing service in Benbrook — it is all the same job, and the estimate is free either way.

Timing

Tree care calendar for Benbrook

When to do what in Benbrook. Timing is the cheapest tree-care decision there is.
WhenWhat matters
Jan–FebPrune now. This is oak wilt country, and winter is the only unambiguously safe window.
Feb 1–Jun 30Absolutely no oak pruning. Red oaks here die fast and connected root systems carry the fungus between trees.
Mar–MayWatch red oaks for rapid whole-crown browning — that is the oak wilt signature and it is a call-today situation.
Jun–AugDrought stress on sandy loam over sandstone. Cedar encroachment accelerates; pasture clearing is easier once the ground is firm.
Sep–OctPlanting and soil work. Ground is workable and the heat has broken.
Nov–DecClearing season — firm ground, no nesting restrictions, best visibility through the understory.

Straight answers

Land Clearing in Benbrook — straight answers

What does land clearing cost in Benbrook?

Most Benbrook jobs run $1,500–$6,000 per acre. Access moves this more than tree size does.

Do you cover Benbrook?

Yes — Benbrook is in Tarrant County, inside our regular route, 11 miles from our Fort Worth base. Estimates are free and usually within a couple of business days.

When is the right time of year?

Late summer through winter for most work. On oaks it is not optional — nothing between February 1 and June 30, because of oak wilt.

Are you licensed and insured?

General liability and workers' compensation, certificate sent before you book. Texas does not license tree services, which is why that question matters more here than elsewhere.

FAQ

Land Clearing in Benbrook — questions we get asked

How much does land clearing cost per acre near Benbrook?

For light underbrush and scattered trees, budget roughly $1,500–$3,000 per acre mulched in place. Dense cedar or heavy timber with haul-off runs $4,000–$6,000+ per acre. Steep, wet or hard-to-access ground pushes it higher. We quote per job after walking it, because per-acre averages are close to meaningless until someone has seen the stems.

Do I need a permit to clear land in Tarrant County?

Outside city limits in Tarrant County, clearing your own agricultural or residential acreage generally does not require a permit, though burn bans and county burn permits apply to disposal. Inside city limits, or on platted land, tree ordinances and land-disturbance rules often do apply. We check before we start.

Can you work around my schedule?

Usually. Most residential work happens on weekdays during business hours, but we can often arrange early starts or a specific day if access, pets or gates require it. Commercial properties routinely get after-hours or weekend scheduling.

Do I need to be home while you work?

No, as long as we have access and have already walked the job with you. Plenty of Benbrook customers are at work while we are there. We will call before we start and send photos when we finish.

What if I only want an opinion, not work done?

That is fine and it is free. A fair share of what we look at does not need what it was quoted for. We would rather tell you that and be the people you call next time.

What payment methods do you take?

All standard forms — card, check, cash and bank transfer. On larger jobs a deposit is normal with the balance due on completion, after you have seen the finished work. We do not ask for payment in full before starting.

Do you serve areas outside Benbrook?

Yes — our regular territory covers Tarrant, Johnson, Parker, Hill and Bosque Counties and the cities inside them. Benbrook is on our normal route.

Land Clearing near Benbrook

We cover the whole corridor, so a job in Benbrook is rarely a special trip.

See all cities in Tarrant County, or our full service area map. Looking for land clearing across the whole region? See Land Clearing & Lot Clearing.

Standards and sources we work to

Prices are typical ranges for North Central Texas and are not a quote. Every job is quoted in writing after an on-site visit.

Need land clearing in Benbrook?

Free written estimate, usually within a couple of business days. Licensed, insured, and we clean up completely.

(817) 508-9940

Request a free estimate

Monday–Friday, 8:00 AM – 5:00 PM · Storm and hazard calls are answered outside office hours.

Call (817) 508-9940